Changing The Battery - Leica Zeno 20 User Manual

4.2.2
Replacing an Empty
Battery
Remove the
Battery: Step-by-
step
Insert the Battery:
Step-by-step
Zeno 20 Android, Operation

Changing the Battery


The batteries are hot-swappable. You can remove an empty battery and
replace it with a charged one without turning off the device completely. Before
removing an empty battery, put the device into sleep-mode. After replacing the
battery you can resume normal operation.
2a 2a 2a
009327_001
Step Description

Ensure that the handheld is put into stand-by mode.
1. Place the Zeno 20 on a stable surface, with the back side facing up.
2. While pushing the release lever to the position "unlocked", open and remove
the cover of the battery compartment.
3. To release the battery from the compartment, press down the latch.
4. While pressing down the latch, lift the battery with your thumb and remove it
from the compartment.
1a
1b
009329_001
Step Description

To open the battery compartment, follow the instructions of the previous
paragraph.
1. Insert the battery into the compartment with the contacts facing the top,
until the battery clicks into place.
2. Reattach the compartment cover by inserting it bottom first. Close the
battery compartment until it clicks into place. The release lever jumps back to
the position "locked".

The IP67 protection is only ensured if the battery compartment is
attached correctly!
4 4
2b
3 3
2b 2b 2a
24