Leica Zeno Mobile How-To Manual
  1. Manuals
  2. Brands
  3. Leica Manuals
  4. Data Loggers
  5. Zeno Mobile
  6. How-to manual
Leica Zeno Mobile How-To Manual

Leica Zeno Mobile How-To Manual

Hide thumbs Also See for Zeno Mobile:
Table of Contents

Advertisement

Quick Links

Leica Zeno Mobile
How-To Guide
Version 1.8
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zeno Mobile and is the answer not in the manual?

Questions and answers

Related Manuals for Leica Zeno Mobile

Summary of Contents for Leica Zeno Mobile

  • Page 1 Leica Zeno Mobile How-To Guide Version 1.8 English...

  • Page 2: Table Of Contents

    2.10 How to add/edit attributes? 2.11 Working with gamtec 2.12 Working with Cable Locators 2.13 How to digitize Features in Zeno Mobile? 2.14 Multi-Part Features 2.15 How to stake out points/ lines in Zeno Mobile? 2.16 Licensing Table of Contents...

  • Page 3: First Steps In Zeno Mobile

    First Steps in Zeno Mobile Starting Zeno Mobile To start Zeno Mobile tap the Zeno Mobile App icon Zeno Mobile starts in the Open Project view. When starting Zeno Mobile for the first time, there is only a default project called "Project 1"...
  • Page 4 How to prepare Zeno Mobile for GNSS? For detailed information on Unit Settings see: How to change the unit settings? The Zeno Mobile Noti- The Zeno Mobile Notification Area at the bottom displays GNSS information: fication Area GNSS solution type Estimated position...
  • Page 5 Tap the switcher and slide it rightwards to switch GNSS ☞ By default, GNSS is off to save bat- tery. Tap the Back button at the bottom to return to the Zeno Mobile Map View. First Steps in Zeno Mobile...
  • Page 6 If you have acquired a Zeno MobileProfessional license you can collect more than one feature on a single measurement (Multi-Collect) by tapping icon in the feature tag. For further details on Multi-Collect please refer to the Zeno Mobile Help menu. First Steps in Zeno Mobile...
  • Page 7 The internal GNSS antenna of Zeno 20 is pre-configured and ready to be used. on/off? But, in order to save battery, the antenna is not switched on automatically when starting up Zeno Mobile. There are two locations from where you can switch on the internal GNSS: from the Android Quick Settings menu •...
  • Page 8 Tap the switcher and slide it rightwards to switch ON the internal GNSS. In the Zeno Mobile Notification Area , the GNSS icon shows up to indicate the solution type. ☞ To save battery, switch off GNSS when not needed.
  • Page 9 How to measure a Let us assume that after you have measured a series of trees along a street line/polygon? you want to measure the street. The street is a line feature. First Steps in Zeno Mobile...
  • Page 10 The feature tag pops up suggesting that the point measured is another tree. Tap the feature tag to open the Wheel Menu. In the Wheel Menu, tap Not Tree? First Steps in Zeno Mobile...
  • Page 11 Tap the Name field and type, for example, "Street". Tap the System Name field and select "Polyline" from the drop-down list. Tap OK to create the fea- ture layer "Street". The new layer is selected for use automatically. First Steps in Zeno Mobile...
  • Page 12 Tap Finish to leave the wizard and create the profile. The new profile is selected automatically. Tap the toolbar button. After a while, the icon becomes green and the position accuracy increases. To stop RTK, tap the button again. First Steps in Zeno Mobile...
  • Page 13 Tap the toolbar button to switch the gamtec mode on and off. Make sure that WiFi is switched off. Zeno Mobile automati- cally sets up a hotspot of its own. ☞ For details on how to proceed when you are already connected to a network, refer to the Zeno Mobile Help menu.
  • Page 14 In the Zeno Mobile Notification Area, a message con- firms that the setup has been oriented successfully. The symbol that indicates the gamtec setup in the Map View turns from red to green Now you can start taking offset measurements. Disto S910 measurements are always triggered on the Disto S910 itself.

  • Page 15: Welcome To The Zeno Mobile Help

    The Zeno Mobile User Interface How to start Zeno When you start up Zeno Mobile for the first time you need not care about Mobile? either installing or licensing as it is preinstalled and licensed on the Zeno 20 in advance, together with the ordered antenna configuration.
  • Page 16 Press the Open Apps button on the right to get a list of all open Apps. The Zeno Mobile Navi- To open the Zeno Mobile Navigation Slider tap gation Slider the left side of the Map View and swipe it toward the mid- dle.
  • Page 17 How to prepare Zeno Mobile for GNSS? For detailed information on Unit Settings see: How to change the unit settings? The Zeno Mobile Noti- The Zeno Mobile Notification Area at the bottom displays GNSS information: fication Area GNSS solution type Estimated position...
  • Page 18 ☞ few seconds with the notification text. For detailed information on single notifications, tap and hold the Zeno Mobile Notification Area and slide it upwards to open the Zeno Mobile Notification Drawer. The Zeno Mobile Con- The Context Window gives you information on Messages and offers access to text Window Attributes and Stakeout functionality, each on a separate tab.
  • Page 19 The Zeno Mobile Context Window: Notifications The Zeno Mobile Context Window: Attributes The Zeno Mobile Context Window: Stakeout The Zeno Mobile Con- In the Messages tab of the Zeno Mobile Context Window notifications are text Window: Notifi- listed chronologically. cations...
  • Page 20 (i.e. the vertex with the green pin) are listed. ☞ If more than one feature is defined on the active fea- ture (multi-col- lect), then its attributes are grouped on so- called feature cards. Welcome to the Zeno Mobile Help...
  • Page 21 Edit Attributes dia- logue. Proceed as described in the topic: How to edit Attributes? Shortcut to the Wheel menu Tap the header of the layer to open the Wheel menu. See also: The Wheel Menu Welcome to the Zeno Mobile Help...
  • Page 22 Zeno Mobile Pro- fessional. See also: 2.9 Multi-Collect The Zeno Mobile Con- In the Stakeout tab of the Zeno Mobile Context Window points/vertices text Window: Stake- and lines can be staked out. See also: Stakeout Workflow: Points Stakeout Workflow: Lines...
  • Page 23 Point that is added automatically when you are in verification mode. See also: Position usage: Verify position Auto Field Types The Zeno Mobile Tool- Tap the Zeno Mobile toolbar buttons to perform central tasks like: bars Take a Measurement Switch RTK on/off Centre on GNSS...
  • Page 24 The most common way to zoom the map will be to touch the map? screen with two fingers and drag the fingers apart to zoom in or pull the fingers together to zoom out. Welcome to the Zeno Mobile Help...
  • Page 25 How to zoom using Tap the map twice with the stylus. the stylus? While doing the second tap keep the stylus tapped on the screen. Move the stylus upwards to zoom out or downwards to zoom in. Welcome to the Zeno Mobile Help...
  • Page 26 By default, the map is oriented towards North. To rotate it tap map? the screen with two fingers and rotate both fingers into the desired direction. >> ☞ The red side of the North Arrow indicates North. Welcome to the Zeno Mobile Help...

  • Page 27: Layer Management

    See also: How to switch GNSS on/off? Layer Management How to manage lay- To access the Layer Management open the Navigation ers? Slider and tap onto Layers. See also: The Zeno Mobile Navigation Slider Welcome to the Zeno Mobile Help...
  • Page 28 How to share data via Dropbox?/How to share data via the Downloads Folder? • Delete layers, see also: How to delete layers? Add attributes, see also: • How to add attributes? Edit the symbology, see also: • How to change the layer symbology? Welcome to the Zeno Mobile Help...
  • Page 29 In the Layer Management, tap the icon in the upper right corner to open the Add Layer From ... page. In the Add Layer From ... page, tap New Layer. The New Layer page shows Welcome to the Zeno Mobile Help...
  • Page 30 How to add the Hexagon Imagery Program? How to add the OSM By default, an OSM layer is included as a background layer in Zeno Mobile. Ini- Layer? tially, it is an offline map stored locally on the device. In order to receive more detailed OSM data, enable mobile data, WiFi or similar.
  • Page 31 How to add the Hexa- By default, the HxIP is available for being selected as a background layer in gon Imagery Program? Zeno Mobile. HxIP is an online map; to be able to use it, enable mobile data, WiFi or similar. ☞...
  • Page 32 Web Map Service page. In the Web Map Service page, tap Hexagon Imagery Program to add it to your project. See also: How to add the OSM Layer? How to add WMS? Welcome to the Zeno Mobile Help...
  • Page 33 Together with the default Open Street Map (OSM) and the Hexagon Imagery Program (HxIP), you can also use a Web Map Service (WMS) as a base map in Zeno Mobile. In order to use a WMS, enable mobile data, WiFi or similar. ☞...
  • Page 34 Service page, it is available for use within other Zeno Mobile projects, too. See also: How to add the OSM Layer? How to add the Hexagon Imagery Program? In the Web Map Service page tap the to check/ edit the connection details. Welcome to the Zeno Mobile Help...
  • Page 35 In the Layer Management, move the WMS on top of the OSM in the hierarchy of layers. See also: How to move layers? How to switch layers on/ off? Welcome to the Zeno Mobile Help...
  • Page 36 See also: How to manage layers? The layer gets highlighted. Move the layer to the new rank in the list while holding it and release it in the desired position to place it. Welcome to the Zeno Mobile Help...
  • Page 37 ☞ The layers are deleted completely from the device. Any data included is lost. How to add attrib- In the Layer Management, tap a layer to open the Layer utes? Settings. Welcome to the Zeno Mobile Help...
  • Page 38 In the Layer Settings, tap Attributes. ☞ Attributes can only be edited for Vector Layers. In the Layer Attributes page, tap the icon in the upper right corner to add an attribute. Welcome to the Zeno Mobile Help...
  • Page 39 New attributes can also be defined using the Zeno Data Model for Excel. See also: How to define attributes using the Zeno Data Model for Excel? How to move attrib- In the Layer Management, tap a layer to open the Layer utes? Settings. Welcome to the Zeno Mobile Help...
  • Page 40 Move the attribute to the new rank in the list while holding it and release it in the desired position to place it. How to delete attrib- In the Table of Contents, tap a layer to open the Layer utes? Settings. Welcome to the Zeno Mobile Help...
  • Page 41 The attributes are deleted completely from the device. Any data that has been collected for the selected attributes is lost. How to change the In the Layer Management, tap a layer to open the Layer layer symbology? Settings. Welcome to the Zeno Mobile Help...
  • Page 42 Tap Size to change the size of point features in the map or the width of line fea- tures. Tap Border Size to change the width of border lines. Welcome to the Zeno Mobile Help...

  • Page 43: Project Management

    The default is None. Select the memory device (Storage System). • Enter a Description (optionally). • ☞ Only the layer structure, symbology and coordi- nate system are taken over from the base project, but no data. Welcome to the Zeno Mobile Help...
  • Page 44 To open a project open the project? Navigation Slider and tap Open to open the Open Project popup. See also: The Zeno Mobile Navigation Slider All projects stored in the Zeno Mobile project direc- tory are listed: Welcome to the Zeno Mobile Help...
  • Page 45 See also: The Zeno Mobile Navigation Slider In the Edit Project page you can: change the Project • Name • see the Storage Sys- tem in use (Internal or SD card) • enter a Description Welcome to the Zeno Mobile Help...
  • Page 46 See also: How to manage projects? How to manage To manage your projects projects? open the Navigation Slider and tap More... to open the Manage Project page. See also: The Zeno Mobile Navigation Slider Welcome to the Zeno Mobile Help...
  • Page 47 SD • card. ☞ Projects stored in other locations on the Zeno 20 are not listed. To edit a project tap the icon next to the project name. The Edit Project page shows up. Welcome to the Zeno Mobile Help...
  • Page 48 There is no need to save a project. All measurements and all edits are automatically stored on the fly. Thus, there is no “Save” button availa- ble. See also: How to open a project? How to delete a project? Welcome to the Zeno Mobile Help...
  • Page 49 Navigation Slider and tap More... to open the Manage Project page. See also: The Zeno Mobile Navigation Slider All projects stored in the Zeno Mobile project directory are listed. ☞ Projects stored in other locations on the Zeno 20are not listed.
  • Page 50 To define a coordinate system for a project which is not in use, tap More..Tap the icon on the right next to the project name to open the Edit Project page. Continue as described in the following steps. Welcome to the Zeno Mobile Help...
  • Page 51 Coord. System to open the Select Coordi- nate System dialogue. The Select Coordinate System page lists all your favourite coordinate systems. The last used is always at the top. ☞ WGS84 is always available. Welcome to the Zeno Mobile Help...
  • Page 52 How to add data from the Download Folder? How to add a pre- In the Select Coordinate defined coordinate System page, tap List to system? choose one of the coordi- nate systems that are pre- installed together with Zeno Mobile. Welcome to the Zeno Mobile Help...
  • Page 53 You can also choose to use a CSCS Model. For detailed information see: How to add a CSCS Model to a transformation? ☞ On how to choose a Geoid Model see: How to add a Geoid Model? Welcome to the Zeno Mobile Help...
  • Page 54 See also: How to add a coordinate system? In the Coordinate System page, tap Datum Transfor- mation to open the list of transformations that are available for the selected coordinate system. Welcome to the Zeno Mobile Help...
  • Page 55 Geosystems\CSCS Models. To add a CSCS model tap icon on the right next to Coordinate System in the Edit Project page. The Coordinate System page shows up. See also: How to add a coordinate system? Welcome to the Zeno Mobile Help...
  • Page 56 Tap the icon on the right next to Datum Transfor- mation to open the Edit Transformation dialogue. Scroll to the bottom and tap CSCS Model to open the CSCS File popup. Welcome to the Zeno Mobile Help...
  • Page 57 To add a geoid model tap Model? icon on the right next to Coordinate System in the Edit Project page. The Coordinate System page shows up. See also: How to add a coordinate system? Welcome to the Zeno Mobile Help...
  • Page 58 None to not use a • geoid model. Geoid File to use a • geoid file Separation to enter a geoid separation manually • Predefined (EGM2008) to use a world-wide model • of low accuracy Welcome to the Zeno Mobile Help...
  • Page 59 An Info dialogue pops up. If the imported layer uses a different coordinate system, the system assumes that the coordinate system infor- mation of the layer to be imported shall be used. Tap OK. Welcome to the Zeno Mobile Help...
  • Page 60 Confirm the dialogue with OK or select a different coordi- nate system and transformation here. ☞ Follow the instructions as given in the topics: How to define a new transformation? How to add a Geoid Model? Welcome to the Zeno Mobile Help...
  • Page 61 To change the Unit settings unit settings? open the Navigation Slider and tap Settings to open the Settings page. See also: The Zeno Mobile Navigation Slider In the Settings page, tap Unit. The Select Unit page shows up. Welcome to the Zeno Mobile Help...

  • Page 62: How To Import/ Export Project Data

    • the Disto S910 height (available with Zeno Mobile Professional) • See also: How to set up gamtec? How to import/ export project data?
  • Page 63 In the Layer Management, tap the in the upper right from another project? corner to open the Add Layer From ... page. In the Add Layer From ... page, tap Project to get a list of all available projects. Welcome to the Zeno Mobile Help...
  • Page 64 Dropbox is one of the media devices to add layers, projects or coordinate sys- Dropbox? tems and can be accessed using the respective Add Data From ... pages. See also: How to add data? In the Add Data From ... page, tap Dropbox to open the directory. Welcome to the Zeno Mobile Help...
  • Page 65 Browse to the directory where the layer, project or coordi- nate system to be imported is stored. ☞ Only data types supported by Zeno Mobile are shown in the list. See also: Import formats ☞...
  • Page 66 Add Data From ... pages. See also: How to add data? In the Add Data From ... page, tap Download Folder to open the direc- tory. Welcome to the Zeno Mobile Help...
  • Page 67 ☞ Only data types supported by Zeno Mobile are shown in the list. See also: Import formats On how to add layers using the Zeno Data Model, see also: How to ☞...
  • Page 68 Making use of the Zeno Data Model for Excel, you can also prepare a layer tem- the Zeno Data Model plate in the office. The template can be read by Zeno Mobile to add layers to for Excel? the system.
  • Page 69 How to define a list domain (choice list)? On how to export the Zeno Data Model from Excel and import it to Zeno Mobile see: How to transfer the Data Model to Zeno Mobile?
  • Page 70 Defining a domain is a neat way to handle lists: changes in the list entries are taken over automatically for all instances where the domain is referenced. Switch to the Excel sheet called "Lists". Enter your list of attributes in one column. Welcome to the Zeno Mobile Help...
  • Page 71 Copy the *.zdm file to the Download Folder on the Zeno 20 or to Dropbox. In Zeno Mobile, open a project or create a project and go to the Layer Management. See also: How to manage layers?
  • Page 72 How to share data via Dropbox is one of the media devices to share layers or projects. Dropbox? See also: How to share data? Welcome to the Zeno Mobile Help...
  • Page 73 Dropbox. ☞ In order to share data via DropBox you have to go through Cloud Storage Authentication once. For future access you can make the sys- tem remember your e-mail address and pass- word. Welcome to the Zeno Mobile Help...
  • Page 74 How to share data via The Download Folder is one of the media devices to share layers or projects. the Downloads See also: Folder? How to share data? Welcome to the Zeno Mobile Help...
  • Page 75 How to manage layers? How to manage projects? The layer or project gets highlighted. ☞ You can also select multiple layers or projects. Tap the icon in the action bar. In the drop-down list, tap Download Folder. Welcome to the Zeno Mobile Help...
  • Page 76 Done in the upper right corner to upload the layer or project. How to export data Zeno Mobile supports the use of external storage for data export. using an external MicroSD card (Micro Secure Digital) • storage? USB flash drive •...
  • Page 77 How to share data via the Downloads Folder? ☞ You can also select multiple layers or projects. Tap the icon in the action bar. In the drop-down list, tap SD Card or USB Stor- age. Welcome to the Zeno Mobile Help...
  • Page 78 Tap the icon to create a directory. See also: How to share data? How to import data Zeno Mobile supports the use of external storage for data import. using an external • MicroSD card (Micro Secure Digital) storage? USB flash drive •...
  • Page 79 KML files including photos • ASCII files (using a specific format) • • Shapefiles CAD files (read-only) • Zeno Mobile projects • • Coordinate systems saved in trfset.dat files Export formats You can export: Welcome to the Zeno Mobile Help...

  • Page 80: How To Prepare Zeno Mobile For Gnss

    Make sure that you are connected to GPS. external SmartAn- See also: tenna (GG04/GG04 How to switch GNSS on/off? plus/GG03/GG02 In the Zeno Mobile Navigation Slider, tap Settings. plus)? See also: The Zeno Mobile Navigation Slider Welcome to the Zeno Mobile Help...
  • Page 81 ☞ If the Bluetooth connection cannot be estab- lished tap the Search button at the bottom of the page to reinforce a scanning for sensors in range. ☞ Only Zeno SmartAntennas can be connected. Welcome to the Zeno Mobile Help...
  • Page 82 How to change the antenna height? reset the antenna, see also: How to reset the sensor • in use? view the antenna information, see also: How to get • information on the sensor in use? Welcome to the Zeno Mobile Help...
  • Page 83 Make sure that you are connected to the antenna. ☞ The cut-off angle can only be changed for the antenna in use. In the Zeno Mobile Navigation Slider, tap Settings. See also: The Zeno Mobile Navigation Slider In the Zeno Mobile SENSOR Settings, tap GPS.
  • Page 84 Make sure that you are connected to the antenna. antenna height? ☞ The antenna height can only be changed for the antenna in use. In the Zeno Mobile Navigation Slider, tap Settings. See also: The Zeno Mobile Navigation Slider In the Zeno Mobile SENSOR Settings, tap GPS.
  • Page 85 GLONASS, you have to go through the authentication procedure once again manually. Make sure that you are connected to the antenna that you want to upgrade. See also: How to connect to an external SmartAntenna (GG04/GG04 plus/GG03/GG02 plus)? Welcome to the Zeno Mobile Help...
  • Page 86 In the Zeno Mobile Navigation Slider, tap Settings. See also: The Zeno Mobile Navigation Slider In the Zeno Mobile SENSOR Settings, tap GPS and then Antenna. All antennas in range are lis- ted but only the antenna in use can be edited. Tap the...
  • Page 87 Browse Auth-Code File • For all three options the procedure corresponds to the licencing options you have for Zeno Mobile. See also: How to get a licence online? How to enter a licence key manually? How to browse for a licence file? The upgrade may take several minutes.
  • Page 88 Make sure that you are connected to the sensor. ☞ Only the sensor in use can be reset. In the Zeno Mobile Navigation Slider, tap Settings. See also: The Zeno Mobile Navigation Slider In the Zeno Mobile SENSOR Settings, tap GPS and then Antenna.
  • Page 89 Make sure that you are connected to the sensor. tion on the sensor in ☞ You can only request information on the use? antenna in use. In the Zeno Mobile Navigation Slider, tap Settings. See also: The Zeno Mobile Navigation Slider Welcome to the Zeno Mobile Help...
  • Page 90 Settings, tap GPS and then Antenna. All antennas in range are lis- ted but only the antenna in use can be edited. Tap the icon next to it to open the Antenna Settings page. Welcome to the Zeno Mobile Help...
  • Page 91 For selected countries, the Zeno 20 is shipped with a pre-customised file? Leica SmartNet RTK profile. As soon as you purchase a valid Leica SmartNet licence, the Leica SmartNet profile can be used for obtain- ing centimetre accuracy. You are provided with a User ID and Pass- word and are informed upon the Mountpoint to be used for your Leica SmartNet RTK profile.
  • Page 92 Tap Finish to leave the wizard and create the RTK profile. It is selected and used automatically. ☞ RTK profiles only have to be defined once and can then be used any time you connect to RTK. Welcome to the Zeno Mobile Help...
  • Page 93 HxIP feeds Zeno Mobile with detailed imagery of populated locations in the continental United States, Canada and various European regions. Program cov- erage is rapidly increasing. See also:...
  • Page 94 If you want to use a positioning service, for example like SAPOS, choose Internet. Tap Next at the bottom of the page to proceed to the Select Server page. Tap the in the upper right corner to define the RTK Server. Welcome to the Zeno Mobile Help...
  • Page 95 The newly added data server is selected by default. ☞ To edit the server tap the icon to its right. Tap Next at the bottom of the page to proceed to the Select Mountpoint page. Welcome to the Zeno Mobile Help...
  • Page 96 RTK service provider. Tap Finish to leave the wizard and create the RTK profile. It is selected and used automatically. How to edit an RTK In the Zeno Mobile Navigation Slider, tap Settings. profile? See also: The Zeno Mobile Navigation Slider...
  • Page 97 To select a profile for edit- ing, tap it once. Only active profiles can be edited. Tap the icon next to the profile’s name to open the Profile Properties. ☞ The SBAS profile cannot be edited. Welcome to the Zeno Mobile Help...
  • Page 98 Mountpoint at the bottom of the Edit Data Server page. How to delete an RTK In the Zeno Mobile Navigation Slider, tap Settings. profile? See also: The Zeno Mobile Navigation Slider Welcome to the Zeno Mobile Help...
  • Page 99 In the Realtime Corrections page, select the RTK profile RTK connection? that you would like to connect to. To establish an automatic connection, switch Auto Con- nect to ON. See also: How to define a real-time correction profile? Welcome to the Zeno Mobile Help...
  • Page 100 If you are connected to RTK using a mobile data connection, be aware of mobile data costs. How to enable Aver- Specify the number of incoming GNSS position coordinates that Zeno Mobile aging? should use for calculating an average coordinate.
  • Page 101 In the Settings page, tap Averaging. A popup shows up. Enter the desired averaging time in seconds. Tap OK. Welcome to the Zeno Mobile Help...

  • Page 102: How To Measure Features In Zeno Mobile

    In the office, you can apply post-processing algo- rithms to error models and thus obtain more accurate results. To post-process all data captured in Zeno Mobile, use the Zeno Mobile tools for Zeno Office. For further information, see the following video: https://www.youtube.com/watch?v=3ZbE77GDKFQ...
  • Page 103 To switch on GNSS from the Android Settings: Tap the All Apps button on your Home screen and then Settings to enter the Android System Settings. In the Android System Settings, tap Location Access. Welcome to the Zeno Mobile Help...
  • Page 104 Tap the switcher and slide it rightwards to switch ON the internal GNSS. In the Zeno Mobile Notification Area , the GNSS icon shows up to indicate the solution type. ☞ To save battery, switch off GNSS when not needed.
  • Page 105 See also: The Feature Tag Make sure that the feature layer in use is of type Point. If it is not, tap the Feature Tag and select or define a layer of type Point. Welcome to the Zeno Mobile Help...
  • Page 106 Settings page. In the Settings page, tap Usage. In the Usage page, tap Update active point. In this usage mode you can remeasure points and the green pin appears like this: Welcome to the Zeno Mobile Help...
  • Page 107 Verified Point and the green pin appears like this: ☞ You can also make the system write the offset values to the Feature layer itself. See also: Auto Field Types Welcome to the Zeno Mobile Help...
  • Page 108 Offsets, Accuracy and the Modification Date are writ- ten automatically to the attribute fields. Optionally take or select a Picture. See also: The Zeno Mobile Context Window: Attributes ☞ Alternatively, you can also access the Edit Attributes page by tapping the Verified Point layer in the Feature tag and then selecting Edit Attributes from the Wheel menu.
  • Page 109 The Wheel Menu offers context-sensitive functionality on vertices or features. To open the Wheel Menu tap the feature tag. The green bubble in the Wheel Menu always shows the 2D accuracy of a meas- ured point. Using the Wheel Menu you can: Welcome to the Zeno Mobile Help...
  • Page 110 Position the device on the first point of the line and tap with GNSS? toolbar button to take a GNSS measurement. If GNSS is switched off you are guided directly to the Location access page. Tap the switcher and slide it rightwards to switch GNSS Welcome to the Zeno Mobile Help...
  • Page 111 If there are no feature layers defined yet in your project then the New Layer dialogue pops up to make you define the first layer in your project. See also: How to add a layer? Welcome to the Zeno Mobile Help...
  • Page 112 The green pin moves to the just measured point. Move on and position the device on the next point or finalise the Line. The line is continued until you finalise it or pause it. Welcome to the Zeno Mobile Help...
  • Page 113 Position the device on the first point of the polygon and gons with GNSS? tap the toolbar button to take a GNSS measurement. If GNSS is switched off you are guided directly to the Location access page. Welcome to the Zeno Mobile Help...
  • Page 114 In order to save battery, GNSS is switched off by default. See also: How to switch GNSS on/off? The Feature Tag pops up and shows you to which feature layer the just meas- ured point (vertex) belongs unless you change the layer. Welcome to the Zeno Mobile Help...
  • Page 115 Take a measurement and move on to a third point. A transparent turquoise preview area is drawn between the first point, the GNSS cursor and the active vertex. It indicates the future geometry of the polygon. Welcome to the Zeno Mobile Help...
  • Page 116 How to finalise a feature? How to pause a feature? As long as you continue a Polygon, its border lines are drawn in turquoise sketching colour and the transparent preview area indicates its future geometry. Welcome to the Zeno Mobile Help...
  • Page 117 To activate a vertex move the green pin toward it, wait until it snaps and release it. Tap the active vertex to open the Feature Tag. Tap the feature tag to open the Wheel Menu. In the Wheel Menu, tap Delete Point. Welcome to the Zeno Mobile Help...
  • Page 118 By tapping it you achieve two things at a time: you pause the feature that is currently in use and • • you are able to select a different feature layer or define a new one. See also: How to pause a feature? Welcome to the Zeno Mobile Help...
  • Page 119 Layers can also be added from other projects, from Dropbox or from the Download Folder. See also: How to add layers from another project? How to add data from Dropbox? How to add data from the Download Folder? Welcome to the Zeno Mobile Help...
  • Page 120 See also: How to pause a feature? How to change a feature layer (Not...?)? How to move a vertex Tap the toolbar button to switch on the Digitize mode. by Tap and Hold? Welcome to the Zeno Mobile Help...
  • Page 121 The new target icon appears to indicate that you are moving a vertex. Move the icon to the desired place in the map, for example to the corner of a building, and release it. Welcome to the Zeno Mobile Help...
  • Page 122 In this case, you would not want to finalise the main street because you will have to go on measuring it after the junction of the rural path. Thus, pause it! Welcome to the Zeno Mobile Help...
  • Page 123 "Path". The feature that has been in use so far, for example "Street", is going to be paused. See also: How to change a feature layer (Not...?)? How to add a layer? Welcome to the Zeno Mobile Help...
  • Page 124 Measure the vertex that shall again belong to a paused paused feature? feature. Double tap onto the Pause icon on the feature that shall be continued. The paused feature is reactivated and the newly measured vertex becomes the next belonging to it. Welcome to the Zeno Mobile Help...
  • Page 125 Then tap the feature tag to open the Wheel Menu. In the Wheel Menu, tap Not ... ?. See also: How to change a feature layer (Not...?)? Welcome to the Zeno Mobile Help...
  • Page 126 Then tap the feature tag to open the Wheel Menu. In the Wheel Menu, tap Finalize Feature. See also: How to pause a feature? Welcome to the Zeno Mobile Help...
  • Page 127 Delete Feature. ☞ The feature is deleted without any confirmation request. How to activate a In the Map View, tap and finalised feature by hold the feature to be acti- Tap and Hold? vated. Welcome to the Zeno Mobile Help...
  • Page 128 You are ready to continue measuring the feature. ☞ The feature that has been active before is paused. See also: How to pause a feature? See also: How to activate a finalised feature using the Green Pin? Welcome to the Zeno Mobile Help...
  • Page 129 The green pin has to snap to one of the fea- ture’s vertices before it can be dropped. ☞ The feature from which the green pin is dragged away is finalised automatically. See also: Welcome to the Zeno Mobile Help...
  • Page 130 A vertex shall be inserted between points 2 and 3 of the following sample line. First, move the green pin to vertex 2. Preview lines indicate the future geometry of the line if you would trigger a meas- urement on the GNSS cur- sor position. Trigger the measurement. Welcome to the Zeno Mobile Help...
  • Page 131 Feature Tag. Then tap the Feature Tag to open the Wheel Menu and select Finalize Feature. See also: How to finalise a paused feature? Workflow example: A vertex shall be inserted between points 2 and 3 of the following sample pol- ygon. Welcome to the Zeno Mobile Help...
  • Page 132 (Multi-Collect) or you can measure one pipeline and clone it. The cloned feature can have, for example, the attribute "Water" while the original remains "Gas". See also: How to add a feature to a vertex (Multi-Collect)? On how to add/edit attributes see the chapter: Welcome to the Zeno Mobile Help...
  • Page 133 A feature can be, but need not be active to be cloned. Let us further imagine that after 800 m the pipelines separate into different directions. Go on measuring the "Gas" pipeline into one direction. At its end, finalise the "Gas" pipeline. Welcome to the Zeno Mobile Help...
  • Page 134 The Selection Roll shows up. Select the other, the "Water" pipe, by tapping it. The "Water" pipe becomes active. See also: How to activate a finalised feature by Tap and Hold (Multi- Collect)? Welcome to the Zeno Mobile Help...

  • Page 135: How To Set Position Limits

    Go on measuring the "Water" pipeline. How to set Position limits? How to set Position In Zeno Mobile it is possible to define Position limits. There are three kinds of limits? Position limits based on the accuracy value: Limit 2D •...
  • Page 136 Limits function. The Limits dialogue shows up. Tap each field to enter a value. ☞ It is possible to set all three accuracy limits together. Type in the accuracy limits and tap OK. Welcome to the Zeno Mobile Help...

  • Page 137: How To Use The Streaming Mode

    Time interval: a vertex is generated each time the specified time interval • elapses, for example one vertex every 5 seconds. • Distance interval: a vertex is generated after the specified distance is cov- ered, for example one vertex every 10 metres. Welcome to the Zeno Mobile Help...
  • Page 138 Slider and tap Settings to open the Settings page. In the Settings page, tap Streaming to open the dia- logue. ☞ If the streaming intervals are already defined, use the switch to activate the Streaming mode. Welcome to the Zeno Mobile Help...
  • Page 139 Tap the toolbar button to measure in Streaming mode. ☞ While using the Streaming mode it is not possi- ble to edit attributes or enter the green pin functionalities. Welcome to the Zeno Mobile Help...

  • Page 140: Multi-Collect

    In the Add Feature dia- logue, tap the feature that you want to add. ☞ All feature layers that are available within the project are listed. ☞ You can add as many features as needed. Welcome to the Zeno Mobile Help...
  • Page 141 How to activate a paused feature (Multi-Collect)? How to finalise a paused feature (Multi-Collect)? How to pause a fea- If you have acquired a Zeno Mobile Professional licence you can collect more ture (Multi-Collect)? than one feature on a single measurement (Multi-Collect). The feature tag shows you all available layers.
  • Page 142 Pause icon appears to indicate that a feature has been paused. ☞ You can pause more than one feature at a time. Alternatively, in the feature tag, tap the feature that shall be paused. Welcome to the Zeno Mobile Help...
  • Page 143 How to add a layer? On the previous vertex the Pause icon appears to indi- cate that a feature has been paused. See also: How to activate a paused feature (Multi-Collect)? How to finalise a paused feature (Multi-Collect)? Welcome to the Zeno Mobile Help...
  • Page 144 The Wheel Menu shows up. Tap Activate Feature to continue the paused fea- ture. ☞ If you double tap the Pause icon in case of Multi-Collect, all paused features on a vertex are reactivated simultaneously. Welcome to the Zeno Mobile Help...
  • Page 145 All paused features are indicated by a Pause icon. Tap the feature that shall be continued, in this case "Path (5)". ☞ To start a new feature of the same type, tap the feature again, in this case "Path". Welcome to the Zeno Mobile Help...
  • Page 146 How to pause a feature (Multi-Collect)? How to activate a paused feature (Multi-Collect)? How to activate a In the Map View, tap and hold the feature to be reactiva- finalised feature by ted. Tap and Hold (Multi- Collect)? Welcome to the Zeno Mobile Help...
  • Page 147 If the feature belongs to more than one feature class (Multi-Collect), a selection roll shows up. Swipe the roll and tap the feature to be reactivated. Welcome to the Zeno Mobile Help...
  • Page 148 The feature is reactivated and the green pin moves to its last measured vertex. You are ready to continue measuring the feature. See also: How to activate a finalised feature using the Green Pin (Multi-Collect)? Welcome to the Zeno Mobile Help...

  • Page 149: How To Add/Edit Attributes

    Tap the feature tag to open the Wheel Menu. utes? See also: The Feature Tag ☞ Shortcut functionality to quickly access the Edit Attributes dialogue is available using the Con- text Window. See also: The Zeno Mobile Context Window: Attributes Welcome to the Zeno Mobile Help...
  • Page 150 How to edit text attributes? • How to edit numeric attributes? • • How to add a photo as an attribute? How to edit attributes using the choice list? • How to edit Date/Time attributes? • Welcome to the Zeno Mobile Help...
  • Page 151 How to edit numeric Tap the Number Attribute attributes? Field to make the standard number keyboard show up. ☞ You need not care about number formats like Integer, Float or Double. Enter the number as you prefer. Welcome to the Zeno Mobile Help...
  • Page 152 Tap Camera to take a photo with the internal camera. The Camera App starts up. Tap Gallery to select a photo from the standard Android picture gallery. In the Gallery, tap a picture to select it. Welcome to the Zeno Mobile Help...
  • Page 153 The title bar at the top changes and displays a trash bin. Tap the trash bin once to delete the picture. How to edit attrib- Zeno Mobile offers you the possibility to pre-define choice lists for picking fea- utes using the choice ture attributes.
  • Page 154 The selected item is written to the List Attribute Field. How to edit Date/ Zeno Mobile offers you the possibility to pre-define a date and/or time attrib- Time attributes? ute field. Depending on the field definition the following input formats are available: Date and time (default) •...
  • Page 155 Tap the right side of the field to select a time. How to add an attrib- Attribute fields can be added to existing feature layers as well as to new fea- ute field? ture layers. Welcome to the Zeno Mobile Help...
  • Page 156 Edit Attributes in the Wheel Menu to open up the Edit Attributes page. See also: The Wheel Menu In the Edit Attributes page, tap the icon in the upper right corner. Continue with Step 5.) Welcome to the Zeno Mobile Help...
  • Page 157 ☞ The new attribute field is added to the Feature Layer as a whole. For features of this layer that have been measured before, the newly defined attribute fields remain empty. Welcome to the Zeno Mobile Help...
  • Page 158 Management. See also: How to add attributes? ☞ New attributes can also be defined using the Zeno Data Model for Excel. See also: How to define attributes using the Zeno Data Model for Excel? Welcome to the Zeno Mobile Help...
  • Page 159 "Spe- cies" as "Oak". Tap OK in the lower right corner to confirm the new attribute field and make it available for use. Welcome to the Zeno Mobile Help...
  • Page 160 Define Limits, for example trees should not have a nega- tive height or a lamp post should not be higher than 3.5 Tap OK in the lower right corner to confirm the new attribute field and make it available for use. Welcome to the Zeno Mobile Help...
  • Page 161 Tap OK in the lower right corner to confirm the new attribute field and make it available for use. How to define a List Give the new field a Name, Attribute field? for example "Trees". Modify the System Name if necessary. Welcome to the Zeno Mobile Help...
  • Page 162 Tap OK in the lower right corner to confirm the new attribute field and make it available for use. How to define a Date/ Give the new field a Name Time Attribute field? and modify the System Name if necessary. Welcome to the Zeno Mobile Help...
  • Page 163 Pinus pinaster . How to make an In your Zeno Mobile project, open the Navigation Slider attribute heritable? and tap Layers to open the Layers menu. Welcome to the Zeno Mobile Help...
  • Page 164 Tap the layer for which you want to add or create a her- itable attribute. In the Layer Settings tap onto Attributes. Welcome to the Zeno Mobile Help...
  • Page 165 Tap OK. Required attributes Required attributes urge the user to fill them before continuing with data cap- ture. If you forget to fill out a required attribute before measur- ing, a dialogue pops up. Welcome to the Zeno Mobile Help...
  • Page 166 When finalising a feature, you can decide to skip the dia- logue and finalise without the required attributes. How to make an In your Zeno Mobile project, open the Navigation Slider attribute required? and tap Layers to open the Layers menu.
  • Page 167 In the Layer Settings tap onto Attributes. Tap the icon next to the attribute which you want to make heritable. ☞ You can also add a new attribute with and fol- low the same steps. Welcome to the Zeno Mobile Help...
  • Page 168 Give the new field a Name, for example "Area". Modify the System Name if necessary. Tap the icon next to Type: Auto. The Define Auto Field dialogue shows up. Welcome to the Zeno Mobile Help...
  • Page 169 For example, if a layer has already an incremental number coming from, for example, Esri, then this layer can be continued in Zeno Mobile. If the last number was 1000, Zeno Mobile will continue counting with 1001.
  • Page 170 Only available for line features. Inserts and updates the total length that a line has got from the second vertex onwards. The Auto Field Length is available by default when you create a line feature layer. See also: How to add a layer? How to add attributes? Welcome to the Zeno Mobile Help...

  • Page 171: Working With Gamtec

    2.11 Working with gamtec How to switch on the To use the Disto S910 together with Zeno Mobile, activate the gamtec mode. gamtec mode and Tap the toolbar button to establish a connec-...
  • Page 172 Switch on the Disto S910 and connect it with Zeno Mobile. On the Disto S910, press the Func key, go to Set- tings and tap WiFi on Welcome to the Zeno Mobile Help...
  • Page 173 WLAN and tap the Set- tings button in the lower right corner. Choose Select Network and tap the Settings but- ton in the lower right corner to start a search for availa- ble networks. Welcome to the Zeno Mobile Help...
  • Page 174 Confirm this information with OK to close the assistant and proceed with orienting the Disto S910. See also: How to orientate gamtec in the map? Welcome to the Zeno Mobile Help...
  • Page 175 A reference target can be any point with known coordi- nates, that is: any point measured before with the Zeno 20 • • any point imported to Zeno Mobile. Make the orientation icon snap to the reference target and release it. The Levelling wizard starts up automatically on the Disto S910.
  • Page 176 The wizard finalises auto- matically after Step 3 as soon as the Disto S910 is levelled. The Measure page shows Welcome to the Zeno Mobile Help...
  • Page 177 A red bar appears at the top to indicate that the laser is active. Point the laser at the refer- ence target and tap the Measure button again to trigger the measurement. Welcome to the Zeno Mobile Help...
  • Page 178 You get the following con- firmation message. Tap the WLAN button to send the measurement result to Zeno Mobile. Welcome to the Zeno Mobile Help...
  • Page 179 Disto S910, tap the Measure button to switch on the laser. ☞ For safety reasons, the laser is switched off automatically after each measurement. See the Disto S910 User Manual for safety instructions. Welcome to the Zeno Mobile Help...
  • Page 180 Point the laser at the target point to be measured and tap the Measure button again to trigger the meas- urement. You get the following con- firmation message. Welcome to the Zeno Mobile Help...

  • Page 181: Working With Cable Locators

    Tap the WLAN button to send the measurement result to Zeno Mobile. In Zeno Mobile, the feature tag pops up on the newly measured vertex to indicate its feature class. The feature tag transforms to the green pin after a few seconds.
  • Page 182 Slider tap onto Set- tings. Switch Cable Locator to Switch on the Leica Ultra. On the Leica Ultra, press and hold the Menu button enter the settings. ☞ Within settings, use the arrow buttons to select an option. Press the button to enter the selected option.
  • Page 183 To connect to the Zeno 20 device, select it in the list and press the button. Once the connection is established, a confirmation mes- sage is displayed. For further information on the Zeno Mobile, check the manuals on myWorld. On Zeno Mobile, a pairing message pops up. Tap Pair.
  • Page 184 Current Direction • The output data can be stored as attributes of a feature class in Zeno Mobile. Additionally, you can use the depth value to modify the height coordinate (Z) of the measured point. For example, if the measured point has a height of 450 m and the buried utility is 2 m below the ground, the resulting height of the feature is 448 m.
  • Page 185 On myWorld, a "Zeno Data Model" Excel tem- plate is available for collecting all measurements coming from the Leica Ultra. In the Cable Locator set- tings page, tap the but- ton to add the necessary attributes for the output page. Welcome to the Zeno Mobile Help...
  • Page 186 • Modify geometry This option allows you to adjust the height measured with Zeno Mobile according to the depth value measured by the locator. Welcome to the Zeno Mobile Help...
  • Page 187 To verify the received data, open the Attributes tab. Workflow 2 Zeno Mobile supports a second workflow for measuring with the Leica Ultra. Use this workflow to measure buried utilities and send the measurement Welcome to the Zeno Mobile Help...
  • Page 188 Zeno Mobile, without the need to activate or create a feature class beforehand. In the Cable Locator set- tings page, switch Measure Position to ON Tap Measure Position to display the Position Offsets dialogue. Offset Along is the distance between the cable loca- •...
  • Page 189 Negative offset value: Start searching for buried utilities with the Leica Ultra. Hold the locator close to the ground and keep it vertical. Once the buried utility is identified, Press and hold the button to measure the utility with Leica Ultra.
  • Page 190 2 minutes. If the connection process takes lon- ger, make it visible again. In the Bluetooth settings, tap the name of the RD8100 device (RD8100_xxxx). A pairing message pops up. Enter the pair code 1234 and tap OK. Welcome to the Zeno Mobile Help...
  • Page 191 How to use RD8100 Once Zeno Mobile and RD8100 are connected, you can measure buried utilit- with Zeno Mobile? ies. Zeno Mobile measures the GNSS location, RD8100 the depth of a buried utility. ☞ Note that the following features are not supported in Zeno Mobile: Transferring GPS measurements from a GPS-equipped RD8100 locator to Zeno Mobile.
  • Page 192 2 m below the ground, the resulting height of the feature is 448 m. To store the output data coming from the cable locator, ensure that the feature to be measured in Zeno Mobile has the proper attributes, for example Depth or Current. ☞...
  • Page 193 In the Cable Locator set- tings page, tap the but- ton to add the necessary attributes for the output page. The attributes are grouped according to the protocol used in the RD8100. Welcome to the Zeno Mobile Help...

  • Page 194: How To Digitize Features In Zeno Mobile

    Press the button to measure the utility with RD8100. The measurement data from the locator are sent to the active feature in the Zeno Mobile project (green pin). To verify the received data, open the Attributes tab. 2.13 How to digitize Features in Zeno Mobile?
  • Page 195 You can also digitise multi-features in analogy to the multi-collect. For further information, refer to the chapter "How to measure features in Zeno Mobile?". Digitise the next point. Welcome to the Zeno Mobile Help...
  • Page 196 To do precise digitising tap digitising? and hold the map until the digitise pencil appears Drag its tip with pixel accu- racy to the exact point that shall be digitised and release it to create the ver- tex. Welcome to the Zeno Mobile Help...

  • Page 197: Multi-Part Features

    Multi-Part Features Multi-part features A multi-part feature is composed of different spatially separated parts defined by a single set of attributes. Zeno Mobile supports multi-part polygons and polylines. Multi-parts are often used to describe objects that can be grouped, such as land parcels with the same owner or islands of the same archipelago.

  • Page 198: How To Stake Out Points/ Lines In Zeno Mobile

    2.15 How to stake out points/ lines in Zeno Mobile? Stakeout Workflow: Drag the green pin to the point to be staked out and drop Points it. This point can be located anywhere in the map. The point coordinates are displayed and can be edited in the stakeout window.
  • Page 199 On how to calibrate the compass, see: How to start Zeno Mobile? Move toward the point to be staked out. The red accuracy circle around the point to be staked out becomes bigger. Welcome to the Zeno Mobile Help...
  • Page 200 Open the Stakeout tab in the context window. See also: The Zeno Mobile Context Window ☞ For a few seconds, the stakeout map displays the active line. Then the map automatically zooms in to the segment closest to the cursor. Welcome to the Zeno Mobile Help...
  • Page 201 On how to calibrate the compass, see: How to start Zeno Mobile? Move toward the line. As soon as you are on the line, the middle arrow turns "green". Welcome to the Zeno Mobile Help...
  • Page 202 Stakeout: How to Open the Stakeout tab in the context window. enter coordinates See also: manually? The Zeno Mobile Context Window Tap on the coordinate field at the bottom. The Point Info popup opens. Welcome to the Zeno Mobile Help...
  • Page 203 If you still want to enter WGS84 you can switch the entry mode. ☞ If you want to enter the values in a different lin- ear unit adapt the Unit Settings, see also: How to change the unit settings? Welcome to the Zeno Mobile Help...

  • Page 204: Licensing

    Based on the Zeno 20 serial number a license file will be generated and stored on the Leica License Server. Zeno Mobile will check the server for the license using the Zeno 20 serial number. If there is an updated license available on the server, then it will be downloaded and used for Zeno Mobile.
  • Page 205 If you prefer to activate offline, refer to chapter: How to browse for a licence file? ☞ Make sure that you have registered your Zeno 20 in myWorld. Otherwise, it is not possible to link the licence with the equipment. Welcome to the Zeno Mobile Help...
  • Page 206 If the Zeno 20 is registered on myWorld and if there is a valid licence, then the licence is downloaded from the server and used for licencing Zeno Mobile. You can follow the process in the Zeno Mobile Notification Area. For detailed information, open the Notification Drawer.
  • Page 207 Drawer for detailed information. See also: The Zeno Mobile Notification Area The Zeno Mobile Context Window: Notifications ☞ You can only activate one licence at a time. In order to activate a sec- ond licence you have to go through a second iteration.
  • Page 208 As an alternative to activating your licence online you can also download the licence file? licence file manually from myWorld, store the file on the Zeno 20 and then browse for that file in Zeno Mobile. See also: How to enter a licence key manually? ☞...
  • Page 209 If the licencing fails, open the Notification Drawer for detailed information. See also: The Zeno Mobile Notification Area The Zeno Mobile Context Window: Notifications How to show infor- You can also inspect the licences that are currently active on your Zeno 20. mation on active...
  • Page 210 ☞ If Zeno Mobile is not licenced yet and you tap License Info, you get the message “Zeno Mobile is not licenced” in the Zeno Mobile Noti- fication Area and Drawer. See also: The Zeno Mobile Notification Area The Zeno Mobile Context Window: Notifications...
  • Page 212 ZenoMobile-1.8.0en Original text Printed in Switzerland © 2018 Leica Geosystems AG, Heerbrugg, Switzerland Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 www.leica-geosystems.com...

Table of Contents

Save PDF