Installation - Zanussi ZHC 60 136 X User Manual

Installation

Make sure that the cooker hood is disconnected from the power supply before carrying out
the installation.
• Decide where the cooker hood is to be installed, using a pencil mark the 4 points on the wall
corresponding to 2 upper fixing points and 2 lower fixing points, ensuring that these points then
correspond to the fixing points located at the back of the cooker hood.
• Perform 4 drill holes of Ø 6 mm.
• Insert 4 wall screw anchors and two screws in the upper drill holes on which to affix the cooker
hood.
• Hang the cooker hood on the wall.
14
208
2 3 4