Table of Contents
Advertisement
SPS 4001B
OVERVIEW
1-2
The SPS 4001B provides the capability of performing automatic, timed or on
demand, calibrations of a single Oxymitter 4000 without sending a technician
to the probe site.
The SPS 4001B replaces the SPS 4000, a similar unit with exposed analog
devices mounted to a stainless steel support bracket. The operating
parameters of the SPS 4000 and SPS 4001B are identical. All SPS units
require additional calibration system components. These components,
available from Emerson Process Management, are listed in Table 1-1.
The SPS 4001B is fully enclosed in a NEMA cabinet suited for wall-mounting.
The enclosure provides added protection against corrosive atmospheres and
incidental impact damage.
Emerson Process Management has offered multiprobe autocalibration
sequencer systems for many years. These autocalibration systems are most
cost effective for boilers and other combustion processes that utilize many
probes. Users with only one probe per combustion process can take
advantage of Emerson Process Management's autocalibration capability with
the SPS 4001B.
Instruction Manual
IM-106-340AC-1, Rev. 1.2
January 2007
Advertisement
Table of Contents
