Table of Contents
Advertisement
8. Chrono/Stopwatch Feature
The Chrono/Stopwatch feature allows you to record any timed activity. Your chrono records can be played back and shared
with HQ Online when you connect MOD to Recon HQ.
To use the Chrono/Stopwatch feature:
1. While on the Dashboard screen, Press SELECT to activate Chrono/Stopwatch mode, the numbers will turn yellow
and start counting
2. Pressing SELECT a second time will stop the chrono and save the results to the Chrono history
3. Pressing SELECT a third time will reset the counter and grey-out the numbers once again so it is ready for another
timed activity.
Any timed activity will be saved to the memory and can then be managed in the Chrono/Stopwatch History screen. Use the
UP or DOWN buttons to navigate to the Chrono/Stopwatch screen.
This screen shows an overview of your most recent record. The number of records is displayed on the left, and the duration
of the most recent record is displayed at the bottom.
Press the select button to enter the Chrono Records
Use the UP and Down buttons to navigate the list of records.
Page 23 of 39
Advertisement
Table of Contents
