Connecting To Pc/Mac - Recon MOD Live User Manual

Windows:
•
Intel Pentium 4 or higher processor
•
1GB of RAM
•
Screen resolution of 1024x768 or greater
•
USB 2.0 port for connection with Recon goggles
•
Internet connection for connection with Google Maps
•
Windows XP Service Pack 2 or later, Windows Vista, or Windows 7
Mac:
•
Intel Core Duo or higher processor
•
USB 2.0 port for connection with Recon goggles
•
Internet connection for connection with Google Maps
•
Mac OS X v10.6 or later
•

3.9 Connecting to PC/Mac

To ensure best charging and data transfer performance follow these easy steps.
To connect MOD to your PC or Mac to charge, or transfer data:
1. Power on by holding the POWER/SELECT button for 2 seconds
2. Plug the micro USB cable's smaller end into the micro USB port located under the protective cover on the right
side of the goggles
3. Plug the USB cable's larger end into the USB port in your PC or Mac
4. If your computer does not recognize MOD try reinserting the USB cable
5. Upon successful connection the micro USB port on MOD will illuminate RED for charging and the Power button will
flash blue.
Page 11 of 39