Table of Contents
Advertisement
4.7 Memory and Data Storage
MOD offers storage of Up to 50 hours of recorded data. At any time you can upload all data from MOD directly to your
Recon HQ software that is provided from http://www.reconinstruments.com/download-latest-recon-hq-software. It is
recommended that you download MOD data after every trip to maintain appropriate available space. To learn more about
Recon HQ see section 2.4
Whenever you power off MOD for longer than 6 hours or you use the RESET STATS feature in preferences, MOD will save
and reset all of your Last Run, Performance, Elevation, and Mountain stats pages. In addition it will reset all Jumps and
Chrono records.
Resetting the stats is not the same as deleting your data. Even though old stats become inaccessible on the MOD display
following a reset, your data is always saved in memory and will not be erased until you connect to ReconHQ for download.
Important: To be sure that no data is compromised while recording, be sure to maintain a strong battery level, and try not
to let MOD's battery drain completely. To learn more, see 'About MOD's Battery'
4.8 Replacing the Remote Battery
The Recon Remote uses one CR2032 (3V) battery. The Remote Batteries should last up to ___ years under normal use.
To replace the battery use a coin or flathead screwdriver to open the back of the remote by turning the cover counter-
clockwise. Remove the old battery and replace it with a new one. Then return the cover and secure it with the coin or
flathead screwdriver by turning the cover clockwise.
Page 16 of 39
Advertisement
Table of Contents
