Getting Started; Charge Your Headset - Jabra BT 121 User Manual

3. What your new headset can do
US
Your Jabra BT121 lets you do all this (dependent on your phone
supporting the function):
• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place call on hold*
* Phone dependent
Specifications
• Talk time up to 8 hours/standby time up to 170 hours
• Rechargeable battery with charging option from AC power supply, PC via
USB cable or car charger (PC USB cable and car charger sold separately)
• Weight 1 / oz (14g)
2
• Operating range up to 33 feet (10 meters)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification (see glossary page 10) version 2.0

4. Getting started

The Jabra BT121 is easy to operate. The answer/end button on the headset
performs different functions depending on how long you press it.
Instruction: Duration of press
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds

5. Charge your headset

Make sure that your Jabra BT121 headset is fully charged for 2 hours before
you start using it. Use the AC power supply to charge from a power socket.
Connect your headset as shown in fig. 2. When the light indicator (LED) is
solid blue, your headset is charging. When the solid blue LED light turns off,
it is fully charged. (Follow step 1-2 in fig. 2).
6. Turning your headset on and off
• To turn on your headset press the answer/end button until you see a
burst of blue flashes on the indicator light (LED)
• To turn off your headset press and hold the answer/end button until you
see a burst of blue flashes on the indicator light (LED)
4
7. Pair it with your phone
Headsets are connected to phones using a procedure called pairing.
By following a few simple steps, a phone can be paired with a headset
in a matter of minutes. (See figure below).
1. Put the headset in pairing mode
• When you turn on your Jabra BT121 for the first time, the headset will
automatically start up on pairing mode - i.e. It is discoverable for your
phone. When the headset is in pairing mode the LED is constantly lit.
2. Set your Bluetooth phone to 'discover' the Jabra BT121
• Follow your phone's instruction guide. First make sure that Bluetooth is
activated on your mobile phone. Then set your phone to discover the
headset. This usually involves going to a "setup", "connect" or "Bluetooth"
menu on your phone and selecting the option to "discover" or "add" a
Bluetooth device.*
3. Your phone will find the Jabra BT121
• Your phone will find the headset under name "Bluetooth headset". Your
phone then asks if you want to pair with the headset. Accept by pressing
"Yes" or "OK" on the phone and confirm with the passkey or PIN=0000
(4 zeros). Your phone will confirm when pairing is complete.
3
In case of unsuccessful pairing, put the Jabra BT121 into pairing mode
manually. Make sure the headset is off . Press and hold the answer/end button
for approximately 5 seconds until the LED has a constant light. The LED will
fl ash before the light is constant – keep holding down the button until light is
constant.
* Phone dependent
Jabra BT121 Bluetooth headset
4
5
US