Tuning The View - Raymarine GPM400 Reference Manual

View options
There are four view options to choose from: forward, aft, port and
starboard.
o
2.431nm PRT ROTATE 106 T
PRT AFT
Port
Eye point above and to starboard side
of boat, looking to port.
o
2.431nm FWD ROTATE 195 T
FWD
Forward
Default view.
Eye point above and behind the boat,
looking forward.
Pressing FIND SHIP resets to this view.
The current option is highlighted on the toolbar and displayed in the
status bar.
To select the view option
1. Press the PRESENTATION softkey.
2. Press the 3D VIEW OPTIONS softkey.
o
2.431nm STB ROTATE 280 T
STB
AFT
Starboard
Eye point above and to port side of
boat, looking to starboard.
o
2.431nm AFT ROTATE 011 T
AFT
Aft
Eye point above and in front of the boat,
looking behind it.
81
3. Toggle to your preferred view on the VIEW TO softkey.
4. Press OK.
Multiple views
You can display multiple 3D chart views by creating a page that
contains up to four windows. Each window could contain a view of:
• The same area from a different angle.
• Up to four different areas of the chart.
For information about setting up application windows, see Selecting
application windows on page 26.
6.8

Tuning the view

You can tune the 3D chart view using the following features:
• Exaggeration
• Declutter
Chapter 6: 3D Chart