Raymarine GPM400 Reference Manual page 78

6.6 Using the 3D chart
The default toolbar on the 3D chart gives you access to navigation and presentation options.
FIND SHIP
Find Ship
Pressing the FIND SHIP softkey redraws the chart about your cur-
rent location, with your vessel in view and facing forwards.
G-Series Reference Manual
ADJUST ON
GOTO
EYE CENTER
Follow route options
Route list
Waypoint list
ADJUST
ROTATE PITCH
Goto waypoint options
Adjusting the chart view
The default toolbar includes two softkeys dedicated to adjusting the
view of the 3D chart application. ADJUST lets you rotate the view
and adjust the angle (pitch). ADJUST ON sets the reference point
for view settings: either on the center of the image, or on the virtual-
eye position.
To adjust rotate and pitch settings
1. Press the ADJUST softkey.
78
PRESENTATION
D10558-1