Disconnecting A Usb Device; Connecting To External Output Devices; Connecting To A Vga Monitor - Epson EH-LS100 User Manual

Projector Connections
b
Connect the USB cable or USB flash drive to the projector's USB-A port
as shown.
Attention
• Use the USB cable supplied with or specified for use with the device.
• Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
c
Connect the other end to your device, if necessary.

Disconnecting a USB Device

When you have finished presenting with a connected USB device, disconnect
the device from the projector.
a
Turn off and unplug the device, if necessary.
b
Disconnect the USB device from the projector.

Connecting to External Output Devices

Follow the instructions in these sections to connect external devices to the
projector.
g g Related Links
• "Connecting to a VGA Monitor"
• "Connecting to External Speakers"

Connecting to a VGA Monitor

If you connected the projector to a computer using a Computer port, you can
also connect an external monitor to the projector. This lets you see your
presentation on the external monitor even when the projected image is not
visible.
• If you want to output images to an external monitor when the
a
projector is turned off, select Always On as the A/V Output setting
in the projector's Extended menu.
s Extended > A/V Settings > A/V Output
• Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
a
Make sure your computer is connected to the projector's Computer
port.
• Only analog RGB signals from the Computer port can be
a
output to an external monitor. You cannot output signals
input from other ports or component video signals.
p.24
p.25
24