Table of Contents
Advertisement
Chapter 3 -- Installation--The Interface 1000 Personalization Label
9)
Examine the new label's position in the Interface 1000 Front Panel. Adjust the label if needed.
10)
Replace the rubber bezel. Make sure that the foot side of the bezel is toward the bottom of the
instrument.
11)
You will need to rename the Interface 1000 in the Gamry Framework to match the new label. You
can do this using the Framework Options, Instrument... dialog box. In the resulting Dialog Box,
select the device you want to rename and then select the Device Settings... button.
Figure 3-10
Instrument with Bezel Removed - Label Tab Seen
3 - 18
Hide quick links:
Advertisement
Table of Contents
