Using This Manual; Safety Instructions; Electrical Safety; Safety During Operation - Baumatic BMEO6ETL Instructions For Installation And Use Manual

Using This Manual

This Owner's Manual contains important information on safety and instructions intended to assist you in the operation and
maintenance of your appliance.
Please take the time to read this Owner's Manual before using your oven and keep this book for future reference.
The following symbols are used in the text of this Owner's Manual

Safety Instructions

Installation of this oven must be performed only by a licensed electrician. The installer is responsible for connecting the appliance to the mains
power supply in observance of the relevant safety recommendations.

Electrical safety

If the oven has been damaged in transport, do not connect it.
Appliance must be connected to the mains power supply only by a specially licensed electrician.
●
In the event of a fault or damage to the appliance, do not attempt to operate it.

Repairs should be performed by a licensed technician only. Improper repair may result in considerable danger to you

and others. If your oven needs repair, contact a Service Centre or your dealer.
If the supply cord is defective, it must be replaced by a special cord or assembly available

from the manufacturer or an authorized service agent.
Electrical leads and cables should not be allowed to touch the oven.

Install an omnipolar circuit-breaker with a minimum contact opening of 3 mm between the appliance and the mains .The omnipolar

circuit breaker should be sized according to the load and should comply with current regulations (the earth wire should not be interrupted
by the circuit breaker ).
The rating plate is located on the right side of the door.

The power supply of the appliance should be turned off when it is being repaired or cleaned.

Take care when connecting electrical appliances to sockets near the oven.

WARNING
The appliance should be powered down before replacing the lamp to avoid the possibility of electric shock. During oven operation, the interior
surfaces become very hot.

Safety during operation

This oven has been designed only for the cooking of household foods.

During use, the oven interior surfaces become hot enough to cause burns. Do not touch heating elements or

interior surfaces of the oven until they have had time to cool.
Never store flammable materials in the oven.

The oven surfaces become hot when the appliance is operated at a high temperature for an extended period of time.

When cooking, take care when opening the oven door as hot air and steam can escape rapidly.

When cooking dishes that contain alcohol, the alcohol may evaporate due to the high temperatures and the vapour can catch fire if it

comes into contact with a hot part of the oven.
For your safety, do not use high-pressure water cleaners or steam jet cleaners.

Frozen foods such as pizzas should be cooked on the wire grill. If the baking tray is used, it may become deformed due to the great

variation in temperatures.