Component Installation Guide - Viessmann Vitodens 100-W WB1A-24 Installation Instructions Manual

Component Installation Guide

Fig. 63
General single-wall vertical venting layout
Single Wall Venting (Room Air Dependent)
Coaxial vent pipe adaptor (comes
pre-installed on Vitodens 100, WB1A
models 8-24, 8-30, and Vitodens 200,
WB2 models 11-44, 15-60)
IMPORTANT
For Vitodens 200-W, WB2 models
6-24C, 6-24 and 8-32, the vent pipe
adaptor must be ordered with the
boiler.
Vent pipe starter adaptor
(coaxial>single-wall)
Elbow, 90°
Straight pipe
Elbow, 45°
Suspension band / hanger
Wall band
Vent termination coupling
(w bird screen)
Flashing and storm collar
*1
Available in different lengths.
For more detailed information on
component parts see product literature
supplied by special venting manufacturer.
IMPORTANT
Ensure that the venting system is
properly supported.
See page 63 for details.
*1
73