Basic Vent Kit Components (Side Wall Vent System Only) - Viessmann Vitodens 100-W WB1A-24 Installation Instructions Manual

Componentry
Component Parts of the Venting System

Basic vent kit components (Side Wall Vent System only)

For replacement purposes or project-specific requirements,
individual parts can be ordered from Viessmann. Refer to the
table for an outline of basic vent kit componentry that can be or-
dered separately.
36
(continued)
Basic components
Vent pipe adaptor
(comes preinstalled on
models WB1A 8-24, 8-30
and WB2 11-44, 15-60)
Elbow, 87º
Straight pipe,
*1
3.3 ft./1 m
Vent termination
(c/w wall flashings)
Protective screen
(c/w brass adaptor and set (c/w brass adaptor and set
of screws)
*2
Mounting clip
Brass adaptor
3
(c/w set of 20 #8 x / "
8
screws)