Jump-Starting The Generator - Brave BRI7000IER Operating Instructions And Owner's Manual

Operating Instructions
& Owner's Manual
JUMP-STARTING THE
GENERATOR
This generator was not designed to be jump-started through the DC receptacle and it is not
recommended to do so. If you connect an external battery to the DC receptacle before the
generator is started and attempt to start the generator with the key fob or the ignition switch, a jump-
start may occur, but it will likely trip the DC breaker. It is recommended to connect external batteries
to the DC receptacle using the procedure given in Charging External Batteries. If
however, you do trip the DC breaker, press the breaker reset button located next to the DC
receptacle on the control panel.
BRAVE GENERATOR PRODUCT SUPPORT 1-888-980-4938 41