Brave BRI7000IER Operating Instructions And Owner's Manual page 35

Operating Instructions
Fuel Filter
Element Removal
Spark Arrestor Maintenance
• The spark arrester must be serviced every 100 hours to maintain its efficiency, or a decrease in
Horsepower may occur.
• Because of the size of the spark arrester opening in the exhaust grille you may decide that you
do not want to take off the grille. This will not cause an issue unless you drop the arrester or the
clamp or screws behind the grille. Taking the grille off or leaving it on is a matter of your
convenience, but the procedure below will include removing the grille.
1. Remove the exhaust grille to access the spark arrestor.
2. Remove the screws holding the clamp and the spark arrester to the muffler.
3. Clean the spark arrestor with a stiff wire brush.
4. Replace if the wire mesh is perforated or torn.
5. Reinstall the spark arrester and the clamp.
6. Reinstall the exhaust grille.
BRAVE GENERATOR PRODUCT SUPPORT 1-888-980-4938
& Owner's Manual
MAINTENANCE
If the generator has been
running, the
muffler will be very hot.
Allow it to cool before
proceeding.
Element Assembly
CLAMP
EXHAUST
GRILLE
SPARK
ARRESTOR
Fuel Filter
35