Setup - Brave BRI7000IER Operating Instructions And Owner's Manual

CAUTION: Any attempt to start the generator before it has been properly serviced may result
ADD ENGINE OIL: Refer to the diagrams below.
1. Place generator on level surface.
2. Remove the Right Access Panel (Refer to Controls and Features section).
3. Clean area around Oil Hole Dipstick/Plug & Unscrew Oil Hole Dipstick/Plug.
4. Use Supplied Funnel to Fill with appropriate type and amount of oil using Oil Fill Bottle. Refer
to Chart below for recommended oil type based on Environmental temperature.
NOTE: Refer to "Product Specifications" section for universal recommended oil type and oil
amount.
5. Replace Oil Hole Dipstick/Plug and tighten securely.
6. Replace the Right Access Panel.
18
Operating Instructions
PRE-OPERATING
INSTRUCTIONS: SETUP
in engine failure and void warranty.
BRAVE GENERATOR PRODUCT SUPPORT 1-888-980-4938
& Owner's Manual