Brave BRI7000IER Operating Instructions And Owner's Manual page 21

Operating Instructions
GROUNDING THE GENERATOR: Refer to the diagram below.
1. Connect the Ground Terminal on the generator to an acceptable source of electrical ground,
such as a copper-grounding stake, using copper electrical wire with a minimum diameter of
16 gauge.
BATTERY ASSEMBLY AND MAINTENANCE:
1. Remove Left Access Panel.
2. Insert battery into battery tray.
3. Install battery cover and tighten clamping nuts.
4. Disassemble the setscrew, then connect the wires.
The red terminal is anode (+) and the black terminal is cathode (-).
5. Reinstall Left Access Panel.
BRAVE GENERATOR PRODUCT SUPPORT 1-888-980-4938
& Owner's Manual
PRE-OPERATING
INSTRUCTIONS: SETUP
GROUND
TERMINAL
21