Voice Command Options - Nokia Sprint PCS Manual

Voice Command Options

After you have associated a voice tag to a command, you can
select one of the following options:
Playback—listen to the voice command tag.
v
Change—change the voice command.
v
Delete—erase the voice command tag.
v
Using Voice Tags to Dial a Phone Number
In addition to Sprint PCS Voice CommandSM (see page 169),
you can use a voice dial tag to automatically dial a phone
number in your contacts. (A voice dial tag is a command you
record and use to place calls without using the keypad.) Your
phone can store up to 25 voice dial tags.
Assigning a Voice Tag to an Entry
Before you can use voice dialing, you must first assign a voice
tag to the number.
1.
From standby mode, select Names.
2.
Highlight the contact to which you want to assign a
voice tag. Select Options > Contact Details > Options >
Add voice tag.
3.
Press Start, wait for the tone, then speak clearly into the
microphone. Do not select Quit unless you want to
cancel the recording. The phone automatically stops
recording and saves and replays the voice tag.
4.
After you have associated a voice tag to a contact, you
can select Menu > Contacts > Voice tags > Select a contact
> Playback, Change, or Delete.
111 Section 2I: Using Voice Services