If you had a previous Sprint PCS Vision connection, the last
page you visited will display when you launch your browser.
When this occurs, you may not see the "Connecting..."
message when you launch the session. Although the browser
is open, you are not currently in an active data session - that
is, no data is being sent or received. As soon as you navigate
to another page, the active session will launch and you will
see the "Connecting..." message.
Enable PCS Vision
To turn on Sprint PCS Vision:
Select Menu > Settings > PCS Vision > Enable.
©
Net Guard
When you first connect to the Web, the Net Guard will
appear to confirm that you want to connect. This feature
helps you avoid accidental connections. You can disable the
Net Guard in the future by selecting Always Auto-Connect
when the Net Guard is displayed.
To change your Net Guard settings:
Select Menu > Settings > PCS Vision > Net Guard.
©
n
n
Note:
When enabled, the Net Guard appears only once per session.
The Net Guard does not appear if the phone is merely re-
connecting due to a time-out.
168
Section 3B: Sprint PCS Vision
On to activate the Net Guard.
Off to deactivate the Net Guard.