Activate A Voice Command; Voice Command Options; Connectivity - Nokia 2855 User Manual

1. In standby mode, select
Settings > Voice
2. Select a function option you wish
to tag, and select Add.
3. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you want to
cancel the recording.
The phone replays then saves the
recorded tag. appears next to the
function option for which you add a
voice tag.

Activate a voice command

After you have associated a voice
command tag with a phone function,
you can issue a command by speaking
the voice command tag.
1. In standby mode, select and hold
Names.
2. When Speak now
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice
command tag, Found:
phone plays the recognised voice
command tag through the earpiece.
The function you requested is
activated.
Copyright © 2006 Nokia. All rights reserved.
Menu >
commands.
appears,
appears, and the

Voice command options

You can modify voice command tags.
In standby mode, select
Settings > Voice commands, highlight
the voice command tag, and select one
of the following options:
Playback—Listen to the voice
command tag.
Options > Change—Change the voice
command tag.
Options > Delete—Erase the voice
command tag.

■ Connectivity

You can also connect the phone to a
compatible PC using a USB data cable;
and use the phone as a modem to
enable connectivity from the PC.
Remember to make back-up copies of
important data.
For more information, see the Nokia PC
Suite online help. Nokia PC Suite and
all related software can be
downloaded from the U.S. Mobile
Phone products section of www.nokia-
asia.com/pcsuite.
Important: only install and
use applications and other
software from sources that
offer adequate security and
protection against harmful
software.
S e t t i n g s
Menu >
53