Easy Setup - Telrad CPE7000 Indoor Quick Installation Manual

Easy Setup

Please follow the steps below to configure your device through the web interface:
Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the IDU
CPE : http://192.168.254.251
Step2: Enter IDU administrator login username/password to access the web management
interface. The default username/password is admin/admin.
Step3: The page displays in your browser after login; you can simply configure the device
settings.
Step4: Signal Strength indicator on the upper-left corner of webpage. There are two modes to
show different connection status.
Mode: LTE or WiMAX
Either APN Name (LTE mode) or BSID
Operator:
(WiMAX mode)
Signal: (More bars indicate better signal)
(Disconnect, no signal)