Removing The Usb Memory - Panasonic PT-MZ670 Operating Instructions Manual

Removing the USB memory

1) Remove the USB memory after confirming that the indicator on the USB memory is not blinking.
Attention
f The blinking of the indicator of the USB memory attached to the projector is indicating that the projector is accessing (reading or writing) the
USB memory. Do not remove the USB memory from the projector when the indicator is blinking.
f The access status to the USB memory cannot be confirmed when a USB memory without the monitoring function such as indicator is used.
In such case, remove the USB memory after waiting for one of following is completed.
g Turn off the projector.
g When using the Memory Viewer function, switch the input to anything other than the MEMORY VIEWER input.
g When using the pairing function, wait until the pairing data write completion message is displayed on the standby screen.
70 - ENGLISH
Chapter 3 Basic Operations — Using the USB memory