Panasonic SP22P Operating Instructions Manual page 56

Production Stop
b) Cycle stop (This is used to stop production after printing of the
current board.)
1
Press Cycle stop on touch panel.
After printing of the current board is completed, production stops.
If you cancel cycle stop in the middle of printing (with Cycle stop highlighted), press Cycle stop
again. Then the display returns to usual screen, and production continues.
To stop production, see "a) Immediate stop, <How to stop production (return the screen to main
menu)>" on the preceding page.
Page 3-10
Cycle stop
193C-E-OMA03-A01-01