Panasonic SP22P Operating Instructions Manual page 19

SAFETY PRECAUTIONS
DO NOT GIVE A
SHOCK TO THE ELEC-
TRICAL EQUIPMENTS.
There is a risk of an electric
shock, leak or malfunction of
the machine.
M27E
DO NOT DISAS-
SEMBLE THE CAM-
ERA UNIT.
You may be injured or the
machine may break down.
If a breakdown occurs,
consult the manufacturer.
M41E
CARRY OUT PERIODIC MAINTE-
NANCE AND INSPECTION.
If you fail to carry out periodic inspection and
maintenance, the machine cannot exhibit its true
performance. Also, it may break down or produce
defectives.
Periodic inspection and maintenance should be
carried out by a trained person in charge of
maintenance according to the instructions in
MAINTENANCE MANUAL.
M39E
193C-E-OMA00-A03-00
Be sure to observe
CAUTION
TURN ON THE
POWER BEFORE
SUPPLYING AIR.
Your hands or fingers may be
caught in the board support.
(1) Turn ON the power, then
(2) turn ON the air.
M29E
WEAR A PROTECTIVE
HAT AND GOGGLES
FOR MAINTENANCE
WORK.
Your head or eyes may be
injured while performing main-
tenance work.
M44E
BEFORE PERFORMING AUTOMATIC
WIDTH ADJUSTMENT, BE SURE TO
VERIFY NO BOARDS OR OTHER
OBJECTS ARE ON THE CONVEYOR.
Boards or other objects may drop from the con-
veyor, causing damage to the boards or the ma-
chine.
If there are any boards or other objects on the
conveyor, turn OFF the servo switch and remove
them.
M36E
USE A JIG TO FIT AND
REMOVE THE
SPRINGS.
Your hands or fingers may be
injured.
M30EB
BE CAREFUL IN HAN-
DLING SOLDER
PASTE.
Some kinds of solder pastes
are harmful to the human body.
Follow the attached instruc-
tion manuals when using
solder pastes.
M74E
Page 19