Analyzer System Components - ABB ACF-NT Installation Instructions Manual

Appendix

Analyzer System Components

Sample Gas Intake
Sample Gas
Preparation
Air Purifier
Analyzers
Control, Operation
and Display
22
Your analyzer system as delivered may differ from the version described in this
section and shown in the following plans.
 Probe tube made of stainless steel, unheated (Type 40) or heated (Type 42)
 Filter, heated (Type PFE2) with check valve, with backflush (on request)
 Sample gas line, heated (Type TBL01)
 Sample conditioning block, heated with
 Stainless steel micro filter
 Air injector
 Aspirator pump module with
 Automatic purge gas and test gas control
 Flow, pressure and temperature sensors
 Zero gas for spectrometer and oxygen analyzer
 Purge gas for the spectrometer and entire sampling system
 FTIR spectrometer with heated sample cell
 Oxygen analyzer (ZrO
 VOC analyzer (Flame ionization detector, optional)
 Display/control unit in the analyzer cabinet door
 Advance Optima system controller
 FTIR controller
 Control of air injector and oxygen and VOC analyzers
 Interfaces
 Measured values and status signals (analog and digital outputs or Modbus)
 Remote control and diagnostics (Modem and / or Ethernet)
Installation Instructions ACF-NT, ACF-NT V0309
detector, optional)
2
42/23-571 EN Rev. 5