Restarting the DFL-1000
At any time during the installation process if the DFL-1000 is not responding correctly, you can shut it
down and restart it.
Using the web-based manager:
•
Go to System > Status.
•
Select Restart.
Using the CLI:
•
Enter the command.
execute reboot
You can cycle the power on the DFL-1000 using the power switch on the back of the unit.
Resetting the DFL-1000 to the factory default configuration
If restarting does not solve the problem, you can restore the DFL-1000 to its factory default
configuration.
Using the web-based manager:
•
Go to System > Status.
•
Select Restore Factory Defaults and select OK.
The DFL-1000 restarts with the configuration that it had when first powered on.
Using the CLI:
•
Enter the command.
execute reset
The DFL-1000 restarts with the configuration that it had when first powered on.