1. TRANSPORT CONDITIONS 2. STORAGE CONDITIONS 3. ASSEMBLY CONDITIONS 3.1. A A614-00/A615-00 A618-00/A619-00 A628-00/A629-00 SSEMBLING OF THE SIDERAILS 3.2. A A647-00/A648-00 A649-00/A650-00 A651-00/A652-00 SSEMBLING OF THE SIDERAILS 4. CONDITIONS FOR USE 4.1. F UNCTION 4.2. U 4.3. P RECAUTIONS FOR USE 4.4.
As a result, maintenance of the contracted good’s warranty depends on compliance with the conditions for use recommended by WINNCARE and the use of original boards and accessories, which also guarantees you safe use of the medical MSS and its accessories.
The mobility support system is intended to be used on 2,000 mm long WINNCARE beds with a square tube frame of no more than 40 mm. Pole Support Bars Feet side Head side Loosening Tightening 3.1. Assembling of the siderails A614-00/A615-00 A618-00/A619-00 A628-00/A629-00 The mobility support system is marked left and right by the grip jaws.
3.2. Assembling of the siderails A647-00/A648-00 A649-00/A650-00 A651-00/A652-00 Fixing jaw on the bed if it is not already installed, for this : n° 4 Remove the cap of the siderail by pushing inside or outside (depending on the assembly) then remove it with a screwdriver if necessary.
4. CONDITIONS FOR USE 4.1. Function The mobility support system (S.A.M.™) helps people to be independent. The mobility support system is designed to prevent patients from falling while asleep or being transported BUT are not designed to prevent a patient from leaving his or her bed voluntarily. Many accidents happen when the patient tries to leave his or her bed despite the mobility support system being in place.
4.2. Use To sit, take the upper part of the handle of the SAM by the opposite hand and then bring the other hand to the lower bar of the handle. A 'natural' movement causes the leg opposite the SAM to move towards the exit of the bed when you pull toward you with your arms the handle of the SAM.
For assistance, if necessary, in mounting, operation or maintenance or to report unexpected operation or events, call your supplier or Winncare. Only use original parts and accessories distributed by WINNCARE to guarantee safety and maintain product conformity. 4.4. Residual risks...
5.2. Upkeep A detailed examination must be carried out on the mobility support system at least once a year on such parts as: the adjustment Rondo screws, index pins, pins and rivets. 5.3. Cleaning Clean the structure with soapy water and a soft cloth then rinse and wipe dry. All aggressive or scouring products such as detergents, powders, solvents and bleach are prohibited 5.4.
Do not rinse or wipe dry. Inspection that the various functions of the MSS are in good working order. Repairs if necessary Packaging of the MSS with heat shrink wrap Apply the measures recommended by the hospital hygiene department in the event of additional precautionary measures (Contact precautions, Drops, Air) Use of a bleach solution stronger than 5,000ppm (0.5% of active chlorine) must be justified by microbiological risk and applied for the length of time necessary (Risk of ageing of certain materials...
Need help?
Do you have a question about the SAM Ergonom A649-00 and is the answer not in the manual?
Questions and answers