ABB ARR600 Quick Start Manual page 3

Getting started
Wireless network settings
Log in to the Arctic Web user interface using your Web
browser.
Navigate to Network → Mobile WAN.
Change the APN type from "Automatic" to "Manual".
Set the Access Point Name (APN) appropriately (usually
INTERNET or operatorname.com). As this setting depends on
your mobile operator, ensure the APN settings directly from
the operator.
Figure 3. Mobile WAN settings
Complete customer documentation is available in the product pages that can be accessed through
www.abb.com/mediumvoltage
Set the other settings such as the PIN code, authentication,
username and password if required by the operator's
subscription.
Reboot the Arctic device and check the settings and the
cellular network connection status from System → Status.
ARG600/ARR600 | Quick Start Guide 3