Bosch SHX89PW75N Operating Instructions Manual page 14

en-us Getting Started
Settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory
settings.
Change the setting as follows:
Open the door.
1.
Switch on On/Off switch (.
2.
Press Info button 8 for
3.
3 seconds until the following text
is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )* until
4.
the required setting is displayed.
Setting
Time setting
Time format
Time display
Language
Water hardness
Rinse aid dispenser Level 5
Sensor setting
Extra dry
Eco forecast
Auto Power Off
Front Display*
EmotionLight
Infolight*
Start Program
Tone volume
* depending on the features of your dishwasher
14
Factory setting
12:00
24h
Time
American English
°E0-8 Soft
Standard
Off
Off
After 1 minute
On
On
On
Auto
Level 2
Make the selection with setting
5.
buttons + - X.
Press and hold the Info button
6.
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
When you reset your
Note:
dishwasher to the factory settings,
you are taken directly to the settings
for switching on the dishwasher for
the first time.
Infotext
by pressing Info button
Set the current time.
12h or 24h.
Show end of wash cycle with display "Time" or "In
hours".
Language selection.
Setting water hardness. When using Multitabs, select
the lowest setting.
Amount of rinse aid affects drying. When using Multi-
tabs, select setting 0.
Adjusting water clarity detection for best cleaning
results.
Improved drying for glasses and plasticware.
Show the water and energy consumption.
Appliance automatically switches off at end of rinsing
process.
The front display can be selected.
Emotion light can be switched on and off.
Light is projected to signal an active wash cycle.
When switching on, the last selected wash cycle
appears.
Volume of signal at end of wash cycle.