Wi-Fi Direct; Eps; Through The Wi-Fi Device - Samsung SWA-6000 User Manual

You can get the Network parameter values
from your Internet provider_
11. When finished, sebct Return (9), and then
pressthe _ button_ The Secudty Key screen
appears_
12. On the Security Keyscreen, enter your
network's Security Code or PassPhrase_Enter
numbers directly using the number buttons on
your remote control Enter btters by sebcting
a btter with the AT_ _ buttons, and then
pressingthe _ button_
13. When finished, sebct Done at the right of the
screen, and then pressthe _ button_ The
product verifies the network connection and
then connects to the network.
14. After the home theater verifies the network,
sebct OK, and then pressthe _ button_
You can also begin the Manual Network setup
by going to Settings ) Network ) Network
Status_
wPs(PBC)
One of the easiest ways to set up the wirebss
network connection is using the WPS(PBC)function_
If your wireless router has a WPS(PBC)button,
follow these steps:
Follow the Steps 1 to 3 in "Configuring Y()ur
Network ConnectionL (Seepage 19)
1. In the Network Settings screen, change
Network Typeto Wireless_ The product searches
for and then displays a list of the available
networks_
2. Scrollthe list down, select WPS(PBC),and then
pressthe _ button_
3. Pressthe WPS(PBC)button on your router
within two minutes_'fOur product automatically
acquiresall the network settings values it
needs and connects to your network after the
network connection is verified_
4. When it is done, highlight OK, and then press
the _ button_
For a WPS connection, set your wireless
router's security encryption to AES_WEP
security encb, ption does not support a WPS
connection_
The Wi-Fi Direct function allows you to connect Wio
Fi Direct devicesto the product and each other using
a peer-to-peer network, without a wireless router_
Some WkFi Direct devices may not support
the DLNA function if connected via WkFi
Direct_ If this is the case, change the network
connection method you used to connect the
device to the home theater_
WkFi Direct transmissions can interfere
with Bluetooth signals_ Before you use the
Bluetooth function, we strongly recommend
that you turn off the WkFi Direct function on
any device in which it is currently on_
1. Turn on the Wi-Fi Direct device and activate its
Wi-Fi Direct function_
2. in the Home screen, select Settings, and then
pressthe _ button_
3. SelectNetwork, and then pressthe r_ button_
4. SelectWi-Fi Direct, and then pressthe
button_
The Wi-Fi Direct devicesthat you can connect
to appear_
5.
YOu have three ways to complete the Wi-Fi
connection:
® Through the Wi-Fi device_
® Through the product using PBC
® Through the product using a PIN
Each is covered below_
Through the WkFi Device
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device_Seethe device's user manual for
instructions_
5"
21
- English