Settings; The Initial Settings Procedure - Samsung SWA-6000 User Manual

1. Turn on your TV after connecting the product,
and t hen t urn o n the producL When you turn
on the product for t he first time, the product
automatically displays the _nitial Settings
Language screen.
2. Press the ATbuttons toselect the desired
language, and t hen p ress the _ button_
3. Press the _ button tostart function setup_
43Pan-Scan -For older, standard screen,
analog TVs_ Displays 4:3 pictures infull screen
and 1 6:9 p ictures inPan-Scan format that fills
the screen, but cuts o ff t he left a nd r ight sides
ofthe picture and e nlarges the middle verticalty_
5. The N etwork screen appears.
- Before you b egin, confirm that the product is
connected toyour router_
- Set towired orwireless depending on your
network environment.
- Ifyou h ave anetwork with s tatic IP addresses,
we suggest you select Skip by pressing the
BLUE (D) b utton_
Ifyou skip n etwork setup here o rthe setup
does not w ork c orrectly, you can s et u p the
product's network connection later_ (See page
19)
4,
The TV Aspect screen appears. Pressthe A_
buttons to select a TV aspect ratio, and then
press the _ button.
YOuhave four choices:
16:90dginal - For widescreenTVs_Displays
widescmen pictures in their original 16:9 format
and 4:3 pictures (the old, standard format) in
4:3 pillar box format with black bars on the left
and righL
16:9 Full - ForwidescreenTVs. Displays
widescreen pictures in their original 16:9 format
and expands 4:3 pictures to fit! the 16:9 screen_
4:3 Letter Box - Forolder, standard screen,
analog TVs_Displays4:3 pictures in full screen
and 16:9 pictures in letter box format that
retains the 16:9 aspect ratio but puts black bars
above and below the picture_
6° The product verifies the network connection
and then connects to the networL When it is
done, pressthe _ button. The qnitial settings
completed." screen appears, and then the
Home screenappears_
If you want to display the Initial Settings screen
again and make changes, select the Reset
option_ (See page 18)
If you use an HDMI cable to connect the
product to an Anynet+ (HDMFCEC)-comp%nt
Samsung TV and 1_)You have set the Anynet÷
(HDMI-CEO feature to On in both the TV
and the product and 2_) You have set the
TV to a language supported by the product,
the product will select that language as the
preferred language automatically_
14-
Engiish