Wi-Fi Direct - Samsung HT-J5530K User Manual

Settings

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect Wi-
Fi Direct devices to the product and each other using
a peer-to-peer network, without a wireless router.
✎
Some Wi-Fi Direct devices may not support the
DLNA function if connected via Wi-Fi Direct. If
this is the case, change the network connection
method you used to connect the device to the
home theater.
✎
Wi-Fi Direct transmissions can interfere with
Bluetooth signals. Before you use the Bluetooth
function, we strongly recommend that you turn off
the Wi-Fi Direct function on any device in which
it is currently on.
1. Turn on the Wi-Fi Direct device and activate its
Wi-Fi Direct function.
2. In the Home screen, select Settings, and then
press the E button.
Select Network, and then press the E button.
3.
Select Wi-Fi Direct, and then press the E
4.
button.
The Wi-Fi Direct devices that you can connect
to appear.
Settings
Wi-Fi Direct
Picture
Device Name : [HTS]J5530K
Sound
Select your Wi-Fi Direct device to connect to.
Network
System
AndroidXXXXXXX
Language
Security
General
Support
Not Connected
Refresh
Close
22
5. You have three ways to complete the Wi-Fi
connection:
~ Through the Wi-Fi device.
~ Through the product using PBC.
~ Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
2. When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Confirm that the device
that is making the request is your device, select
Yes in the pop up, and then press the E
button to accept.
3. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
~ The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
2. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
Through the Product Using a PIN
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then enter
it into the appropriate field in the Wi-Fi Direct
device you want to connect.
- English