Report Event - Symmetricom TimeSource 3000 Manual

S S S S S S

Report Event

This autonomous message appears when an event is raised, and
again when the event is cleared; also appears when a transient
event occurs. An event is a state of the TimeSource 3000 that does
not cause an alarm.
Message:
<sid> <date> <time>
M <atag> REPT EVT <modifier>
"<aid>:<condtype>,<condeff>,<ocrdat>,<ocrtm>
Note:
S S S S S S S
,,,,:\"<conddescr>\"[:<dgntype>]"
Refer to Table J for parameter definitions.
S S S S S S S S S S S S S S
TL1 Reference
S S
2
4
4
5
107