Report Event - Symmetricom TimeSource 3600 Manual

S S S S S S S

Report Event

This autonomous message appears when an event is raised, and
again when the event is cleared; also appears when a transient
event occurs. An event is a state of the TimeSource 3600 that does
not cause an alarm.
Message:
^^^<sid> <date> <time>
M^^<atag> REPT EVT <modifier>
^^^"<aid>:<condtype>,<condeff>,<ocrdat>,<ocrtm>
Note:
S S S S S S S
,,,,:\"<conddescr>\"[:<dgntype>]"
Refer to Table Table I for parameter definitions.
S S S S S S S S S S S S S S
133
TL1 Reference
S
2
4
4
5