Inspection; Mains Voltage; Removing The Transportation Lock And Fitting The Handlebar - Fitvibe Medical Fitvibexcel Pro Medical User Manual

2.4

Inspection

Please check the Fitvibexcel Pro Medical and accessories upon
delivery for any potential damage sustained during transport and
whether all of the accessories have been supplied (see section 2.1).
Please notify you supplier immediately in the event of transport
damage or missing items. Do not use the Fitvibexcel Pro Medical if
damaged.
In case of condensation wait for set in operation up to the unit is
adapted to the room temperature.
2.5

Mains voltage

The Fitvibexcel Pro Medical is suitable for use with a mains voltage
of either 230V, 50-60Hz or 115V, 50-60Hz. Check whether the mains
voltage in your area matches the unit's voltage as stated on the label
on the rear of the control panel (any voltage higher than that stated
can cause irreversible damage to the machine).
2.6

Removing the transportation lock and fitting the handlebar

The transportation lock inside the electronic unit (30) must be
removed before starting up the Fitvibexcel Pro Medical. To do so,
remove the screws (34) on the base plate (33) of the electronic unit
(30) and pull the metal transportation lock (31) out of the unit.
User manual Fitvibexcel Pro Medical
- 12 -
figure 2