Basics - Kenwood KMM-BT522HD Instruction Manual

BASICS

Faceplate
Display window
Volume
knob
Detach
from the rear of the unit.
button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*
*
1
Only for /
*
2
For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
*
3 : You can also turn off the display information by pressing DISP repeatedly.
For
: USB cable
Flashes when the unit
enters searching status. *
How to reset
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
3
Press DISP repeatedly. ( 34, 35)
/ /
Remote control (RC-406)
Lights up when
Bluetooth
connection is
established. * 1
( 18)
controlled with an optionally purchased remote control.
1
control functions are not available.
How to replace the battery
Reset the unit
within 5 seconds
after detaching
the faceplate.
On the remote control
Press and hold SRC to turn off the power.
2 ( Pressing SRC does not turn on the power. )
Press
• Press and hold
volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
.
(supplied for
Remote sensor (Do not expose to
bright sunlight.)
Pull out the insulation sheet
when using for the first time.
/ : Can be remotely
/ /
or .
to continuously increase the
ENGLISH
)
: Remote
3