Kenwood KMM-BT522HD Instruction Manual page 21

SiriusXM® Radio
(for
SiriusXM settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
SIRIUS XM
CHANNEL LOCK To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
1 Turn the volume knob to select a number.
CODE SET
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings for next time.
LOCK SETTING MATURE CH: Selects the SiriusXM-defined lock setting. ; USER DEFINED: Selects
the individual channels the user wants to lock. ; OFF: Cancels.
CHANNEL EDIT *
1 1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the knob.
"L" appears in front of the channel number.
3 Press and hold
CHANNEL CLEAR * 1
YES: Clears all the locked channels. ; NO: Cancels.
/ /
.
to exit.
)
TUNE START * 2
SIGNAL LEVEL
BUFFER USAGE
SXM RESET
Default: XX
* 1
Displayed only when [USER DEFINED] is selected.
* 2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later
that supports SmartFavorites.
ON: All qualified music channels in the SmartFavorite
will start playback from the beginning of the song. ;
OFF: Cancels.
Shows the strength (NO SIGNAL/WEAK/GOOD/
STRONG) of the current received signal.
Shows the memory usage (0% to 100%) for Replay
buffer.
YES: Resets stored channel and lock setting to
default. ; NO: Cancels.
ENGLISH
17