Kenwood KMM-BT32U Instruction Manual
Kenwood KMM-BT32U Instruction Manual

Kenwood KMM-BT32U Instruction Manual

Digital media receiver
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

KMM-BT32U
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE
MODE D'EMPLOI
RECEPTOR DE MEDIOS DIGITALES
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new Digital Media
Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KMM-BT32U
Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2014 JVC KENWOOD Corporation
B5A-0229-10 (KN)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood KMM-BT32U

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 2 FCC WARNING Informação sobre a eliminação de pilhas This equipment may generate or use radio frequency energy. Changes or modifications Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada to this equipment may cause harmful interference unless the modifications are expressly ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou approved in the instruction manual.
  • Page 3 IC (Industry Canada) Notice CAUTION This device complies with Industry Canada licence-exempt RSS standard(s). This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled Operation is subject to the following two conditions: environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C (1) This device may not cause interference, and to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
  • Page 4: Table Of Contents

    CONTENTS BEFORE USE BEFORE USE Warning Do not operate any function that takes your attention away from safe driving. BASICS GETTING STARTED Caution Volume setting: RADIO • Adjust the volume so that you can hear sounds outside the car to prevent accidents. •...
  • Page 5: Basics

    BASICS Faceplate Remote control (RC-406) Volume knob (turn/press) Display window Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. Detach button Attach Detach How to reset How to replace the battery Your preset adjustments will also be erased.
  • Page 6: Getting Started

    GETTING STARTED Set the initial settings Press repeatedly to enter STANDBY. Press the volume knob to enter [FUNCTION]. Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step until the desired item is selected or activated. Press and hold to exit.
  • Page 7: Radio

    F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: Search for a station www.kenwood.com/cs/ce/ Press repeatedly to select TUNER. CLOCK Press repeatedly (or press on RC-406) to select FM1/ FM2/ FM3/ AM.
  • Page 8: Aux

    RADIO Default: XX Preparation: Select [ON] for [BUILT-IN AUX]. (  4) TUNER SETTING Start listening AUTO YES: Automatically starts memorizing 6 stations with good reception. ; MEMORY NO: Cancels. Connect a portable audio player (commercially available). • Selectable only if [NORMAL] is selected for [PRESET TYPE]. (  4) Auxiliary input jack MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ;...
  • Page 9: Usb / Ipod / Android

    USB / iPod / ANDROID Start playback The source changes automatically and playback starts. USB input terminal On the faceplate On the remote control Playback / pause Press Press CA-U1EX (max.: 500 mA) (optional accessory) Reverse / Fast-forward * Press and hold S / T. Press and hold S / ...
  • Page 10 USB / iPod / ANDROID When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is Direct Music Search (using RC-406) shown. Follow the instructions to install the application. You can also install the latest version Press DIRECT.
  • Page 11: Pandora

    Pandora® Preparation: Create and save a new station Install the latest version of the Pandora application on your device Press and hold the volume knob. (iPhone/ iPod touch), then create an account and log in to Pandora. Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then •...
  • Page 12: Iheartradio

    Preparation: Search for a station Install the latest version of iHeart Link for KENWOOD application on your device Press (iPhone/ iPod touch), then create an account and log in to iHeartRadio. Turn the volume knob to select a category, then press the •...
  • Page 13: Bluetooth

    – Bluetooth function of the connected devcie is turned on. Adjust the microphone – [AUTO PAIRING] is set to [ON]. ( 15) angle – KENWOOD MUSIC PLAY application is installed on the Android device. Secure using cord clamps (not supplied) if necessary. ENGLISH...
  • Page 14 BLUETOOTH® BLUETOOTH — Mobile phone Improve the voice quality While talking on the phone... Press the volume knob to enter [FUNCTION]. Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step until the desired item is selected or activated.
  • Page 15 BLUETOOTH® Make the settings for receiving a call Press to enter Bluetooth mode. Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step until the desired item is Make a call selected or activated. Press and hold to exit.
  • Page 16 BLUETOOTH® Delete a contact NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). Press to enter Bluetooth mode. 2 Press S / T to move the entry position. Turn the volume knob to select [CALL HISTORY], then press the knob. Repeat steps until you finish entering Turn the volume knob to select a contact.
  • Page 17 BLUETOOTH® Other settings Bluetooth test mode Press the volume knob to enter [FUNCTION]. You can check the connectivity of the supported Turn the volume knob to make a selection (see the following table), then press the knob. profile between the Bluetooth device and the Repeat step until the desired item is selected/activated or follow the instructions stated unit.
  • Page 18 BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Listen to Pandora Preparation: Select [ON] for [PANDORA SRC]. (  4) You can listen to Pandora on your smart phone (Android OS) through Bluetooth on this unit. Open the Pandora application on your device. Connect your Bluetooth audio player via Audio player via Bluetooth Bluetooth connection.
  • Page 19: Audio Settings

    AUDIO SETTINGS While listening to any source... PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/ Press the volume knob to enter [FUNCTION]. USER: Selects a preset equalizer suitable to the music genre. (Select Turn the volume knob to select [AUDIO CONTROL], then press the knob. [USER] to use the customized settings.) Turn the volume knob to make a selection (see the following table), [DRIVE EQ] is a preset equalizer that reduces noise outside the car or...
  • Page 20: Display Settings

    Music Control. stored in [CUSTOM R/G/B]. • When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD 1 Press and hold the volume knob to enter the detailed Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.
  • Page 21: Troubleshooting

    • Signal conditions vary, depending on the surroundings. (e.g. album name). number of symbols. • For more information about Bluetooth, visit the following website: www.kenwood.com/cs/ce/ “NA FILE” Make sure the media contains supported audio files. (  18) “READ ERROR” Copy the files and folders onto the USB device again. If this does not solve the problem, reset the USB device or use another USB device.
  • Page 22 The number of registered stations has reached its limit. Android device is unable to route the audio signal to Retry after deleting unnecessary stations from your device. unit. (  18) • Make sure KENWOOD MUSIC PLAY APP is installed on Cannot playback at “CONNECT ERROR” Communication is unstable.
  • Page 23 TROUBLESHOOTING Symptom Remedy Symptom Remedy • Check whether the connected Bluetooth audio player “STATION NOT Broadcast from the station is over. The connected Bluetooth AVAILABLE” audio player cannot be supports Audio/Video Remote Control Profile (AVRCP). controlled. (Refer to the instructions of your audio player.) “STATION NOT SELECTED”...
  • Page 24 Warning Installing the unit (in-dash mounting) • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. Do the required wiring. • Do not connect Battery wire (yellow) and Ignition wire (red) to the (  23) car chassis or Ground wire (black) to prevent a short circuit.
  • Page 25: Connection

    (Not used) (Steering remote control (C) Mounting sleeve wire) Green To rear speaker (left) Green/Black Purple To connect the Kenwood navigation Brown Purple/Black To rear speaker (right) system, refer your navigations (Mute control wire) manual (D) Wiring harness Ignition switch...
  • Page 26: Specifications

    SPECIFICATIONS FM Frequency Range 87.9 MHz — 107.9 MHz (200 kHz space) Version Bluetooth Ver.2.1+EDR / Bluetooth 3.0 Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Frequency Range 2.402 GHz — 2.480 GHz Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Frequency Response (±3 dB) 30 Hz —...
  • Page 28: Avant L'utilisation

    TABLE DES MATIERES AVANT L’UTILISATION AVANT L’UTILISATION Avertissement N’utilisez aucune fonction qui risque de vous distraire de la conduite sure de votre véhicule. FONCTIONNEMENT DE BASE 3 PRISE EN MAIN Précautions Réglage du volume: RADIO • Ajustez le volume de façon à pouvoir entendre les sons extérieurs à la voiture afin d’éviter tout risque d’accident. •...
  • Page 29: Fonctionnement De Base

    FONCTIONNEMENT DE BASE Façade Télécommande (RC-406) Bouton de volume (tournez/appuyez) Fenêtre d’affichage Capteur de télécommande (Ne l’exposez Pas à la lumière directe du soleil.) Retirez la feuille d’isolant lors de la première utilisation. Touche de détachement Attachez Détachez Comment réinitialiser Comment remplacer la pile Vos ajustements préréglés sont aussi effacés.
  • Page 30: Prise En Main

    PRISE EN MAIN Faites les réglages initiaux Appuyez répétitivement sur pour entrer en veille STANDBY. Appuyez sur le bouton de volume pour entrer [ FUNCTION Tournez le bouton de volume pour réaliser une sélection (voir le tableau suivant), puis appuyez sur le bouton. Répétez l’étape jusqu’à...
  • Page 31: Radio

    : Démarrer la mise à niveau du micrologiciel. ; : Annulation (la mise à niveau n’ e st pas activée). Pour en savoir plus sur la mise à niveau du micrologiciel, référez-vous à: www.kenwood.com/cs/ce/ Recherchez une station CLOCK Appuyez répétitivement sur pour sélectionner TUNER. Appuyez répétitivement sur...
  • Page 32: Aux

    RADIO Préparation: Défaut: Sélectionnez [ ] pour [ BUILT-IN AUX ]. (   TUNER SETTING Démarrez l’écoute AUTO : Mémorise automatiquement 6 stations dont la réception est bonne. ; : Annulation. • MEMORY NORMAL Peut être sélectionné uniquement si [ ] est sélectionné pour Connectez un lecteur audio portable (en vente dans le commerce).
  • Page 33: Usb / Ipod / Android

    USB / iPod / ANDROID Démarrez la lecture La source change automatiquement et le lecture démarre. Prise d’ e ntrée USB Pour Sur la façade Sur la télécommande CA-U1EX (max.: 500 mA) Lecture / pause Appuyez sur Appuyez sur (accessoire en option) Recherche rapide vers Maintenez enfoncée  / ...
  • Page 34 USB / iPod / ANDROID Lors de la connexion d’un périphérique Android, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” apparaît. Recherche directe de morceau (en utilisant la RC406) Suivez les instructions pour installer l’application. Vous pouvez aussi intaller la dernière version de l’application...
  • Page 35: Pandora

    Pandora® Préparation: Création et sauvegarde d’une nouvelle station Installez la dernière version de l’application Pandora sur votre appareil (iPhone/ iPod touch), puis créez un compte et connectez-vous sur Pandora. Maintenez enfoncé le bouton de volume. Tournez le bouton de volume pour choisir [ FROM TRACK ] ou [ FROM ARTIST...
  • Page 36: Iheartradio

    Préparation: Recherchez une station Installez la dernière version de l’application iHeart Link for KENWOOD sur votre appareil (iPhone/ iPod touch), puis créez un compte et connectez-vous sur iHeartRadio. Appuyez sur Tournez le bouton de volume pour choisir une catégorie, puis •...
  • Page 37: Bluetooth

    – La fonction Bluetooth du périphérique connecté est activée. – [ AUTO PAIRING ] est réglé sur [ ]. ( – L’application KENWOOD MUSIC PLAY est installée sur le périphérique Android. Ajustez l’angle du microphone Fixez si nécessaire en utilisant des serre-câbles (non fourni).
  • Page 38 BLUETOOTH® BLUETOOTH — Téléphone portable Amélioration de la qualité des voix Quand vous parlez au téléphone... Appuyez sur le bouton de volume pour entrer FUNCTION Tournez le bouton de volume pour réaliser une sélection (voir le tableau suivant), puis appuyez sur le bouton.
  • Page 39 BLUETOOTH® Réalise les réglages de réception d’un appel Appuyez sur pour entrer en mode Bluetooth. Tournez le bouton de volume pour réaliser une sélection (voir le tableau suivant), puis appuyez sur le bouton. Répétez l’étape jusqu’à ce que l’élément Faire un appel souhaité...
  • Page 40 BLUETOOTH® Suppression d’un contact NUMBER DIAL Tournez le bouton de volume pour sélectionner un numéro (0 à 9) ou un caractère ( , #, +). Appuyez sur pour entrer en mode Bluetooth. S / T Appuyez sur pour déplacer la position Tournez le bouton de volume pour choisir [ CALL HISTORY ], puis appuyez sur le bouton.
  • Page 41 BLUETOOTH® Autres paramètres Mode de vérification Bluetooth Vous pouvez vérifier la connectivité du profile pris en Appuyez sur le bouton de volume pour entrer [FUNCTION charge entre le périphérique Bluetooth et l’appareil. Tournez le bouton de volume pour réaliser une sélection (voir le tableau suivant), puis appuyez sur le bouton.
  • Page 42 BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Écoute de Pandora Préparation: Sélectionnez [ ] pour [ PANDORA SRC ]. (   Vous pouvez écouter Pandora sur votre smartphone (Android OS) via le Bluetooth de cet appareil. Ouvrez l’application Pandora sur votre appareil. Connectez votre lecteur audio Bluetooth via la Lecteur audio via Bluetooth connexion Bluetooth.
  • Page 43: Réglages Audio

    RÉGLAGES AUDIO Pendant l’écoute de n’importe quelle source... PRESET EQ DRIVE EQ TOP40 POWERFUL ROCK POPS EASY JAZZ NATURAL FUNCTION Appuyez sur le bouton de volume pour entrer [ USER : Sélectionne un égaliseur préréglé adapté à votre genre de musique. (Sélectionnez Tournez le bouton de volume pour choisir [ AUDIO CONTROL ], puis appuyez...
  • Page 44: Réglages D'affichage

    Cet appareil prend en charge l’application PC KENWOOD Music Editor Light et l’application Android™ KENWOOD Music Control. couleur préréglée* est sélectionné). La couleur que vous avez créé peut être • Quand vous reproduisez des fichiers audio avec des données de chanson ajoutée en utilisant KENWOOD Music Editor Light ou CUSTOM R/G/B mémorisée dans [ KENWOOD Music Control, vous pouvez rechercher des fichiers audio par genre, artiste, album, liste de lecture et chansons.
  • Page 45: Guide De Dépannage

    • nom de l’album). limité de symboles. Pour plus d’informations sur Bluetooth, consulter le site Web suivant: www.kenwood.com/cs/ce/ “NA FILE” Assurez-vous que le support contient des fichiers audio compatibles. (   “READ ERROR” Copiez les fichiers et les dossiers de nouveau sur le périphérique USB. Si cela ne résout pas le problème, réinitialisez le périphérique USB ou utilisez en un autre.
  • Page 46 Le nombre de stations enregistrées a atteint la limite. Essayez de nouveau • Lecture impossible en mode après avoir supprimer des stations inutiles de votre appareil. Assurez-vous que KENWOOD MUSIC PLAY APP est installé sur le BROWSE MODE périphérique Android. (   “CONNECT ERROR”...
  • Page 47 GUIDE DE DÉPANNAGE Symptôme Remède Symptôme Remède • “STATION NOT AVAILABLE” La diffusion de la station est terminée. Le lecteur audio Bluetooth Vérifiez si le lecteur audio Bluetooth connecté prend en charge AVRCP connecté ne peut pas être (Audio/Video Remote Control Profile). (Référez-vous aux instructions “STATION NOT SELECTED”...
  • Page 48 Avertissement Installation de l’appareil (montage encastré) • L’appareil peut uniquement être utilisé avec une alimentation de 12 V CC, à masse négative. • Déconnectez la borne négative de la batterie avant le câblage et le montage. • Ne connectez pas le fil de batterie (jaune) et le fil d’allumage (rouge) au châssis de la voiture ou au fil de masse (noir) pour éviter les courts-circuits.
  • Page 49 Vert Vers l’ e nceinte arrière (gauche) Vert/Noir Violet Pour connecter au système de navigation Marron Kenwood, reportez-vous à votre manuel de Violet/Noir Vers l’ e nceinte arrière (droite) (Câble de contrôle de la sourdine) navigation Faisceau de fils Interrupteur d’allumage Boîte de fusible de la voiture...
  • Page 50: Spécifications

    SPÉCIFICATIONS FM Plage de fréquences 87,9 MHz — 107,9 MHz (intervalle de 200 kHz) Version Bluetooth Ver.2.1+EDR / Bluetooth 3.0 Sensibilité utilisable (S/B = 26 dB) 8,2 dBf (0,71 μV/75 Ω) Plage de fréquences 2,402 GHz — 2,480 GHz Seuil de sensibilité (DIN S/N = 46 dB) 17,2 dBf (2,0 μV/75 Ω) Puissance de sortie +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Réponse en fréquence (±3 dB) 30 Hz —...
  • Page 52 CONTENIDO ANTES DEL USO ANTES DEL USO Advertencia No utilice ninguna función que pueda desviar su atención mientras está conduciendo el vehículo. PUNTOS BÁSICOS PROCEDIMIENTOS INICIALES 4 Precaución Ajuste del volumen: RADIO • Ajuste el volumen a un nivel que le permita oír los ruidos del exterior para impedir accidentes. •...
  • Page 53: Puntos Básicos

    PUNTOS BÁSICOS Placa frontal Mando a distancia (RC-406) Rueda de volumen (girar/pulsar) Ventanilla de visualización Sensor remoto (Do lo exponga a la luz solar brillante.) Retire la hoja aislante cuando se utilice por primera vez. Botón de liberación Fijar Desmontar Cómo reinicializar Cómo cambiar la batería También se borrarán los...
  • Page 54: Procedimientos Iniciales

    PROCEDIMIENTOS INICIALES Configuración de los ajustes iniciales Pulse repetidas veces para ingresar a STANDBY. Pulse la rueda de volumen para ingresar en [ FUNCTION Gire la rueda de volumen para seleccionar (consulte la siguiente tabla) y luego púlsela. Repita el paso hasta que se seleccione o active el elemento deseado.
  • Page 55: Radio

    F/W UP xx.xx YES : Se empieza a actualizar el firmware. ; : Se cancela (la actualización no se activa). Para obtener información sobre cómo actualizar el firmware, consulte: www.kenwood.com/cs/ce/ Búsqueda de una emisora CLOCK Pulse repetidas veces para seleccionar TUNER. CLOCK DISPLAY : La hora del reloj siempre se visualiza en...
  • Page 56: Aux

    RADIO Preparativos: Predeterminado: Seleccione [ ] para [ BUILT-IN AUX ]. (   TUNER SETTING Comience a escuchar AUTO : Memorización automática de 6 emisoras con buena señal de recepción. ; MEMORY : Se cancela. Conecte un reproductor de audio portátil (disponible en el mercado). •...
  • Page 57: Usb / Ipod / Android

    USB / iPod / ANDROID Inicie la reproducción La fuente cambia automáticamente y se inicia la reproducción. Terminal de entrada USB Para En la placa frontal En el control remoto CA-U1EX (Máx.: 500 mA) Reproducción / pausa Pulse Pulse (accesorio opcional) Retroceder / avanzar Pulse y mantenga pulsado  / ...
  • Page 58 USB / iPod / ANDROID Cuando conecte un dispositivo Android, se mostrará “Press [VIEW] to install KENWOOD MUSIC PLAY APP”. Siga las Búsqueda directa de música (mediante RC-406) instrucciones para instalar la aplicación. Antes de la conexión, también puede instalar la versión más reciente de la...
  • Page 59: Pandora

    Pandora® Preparativos: Crear y guardar una emisora nueva Instale la última versión de la aplicación Pandora en su dispositivo (iPhone/ iPod touch) y, a continuación, cree una cuenta e inicie sesión en Pandora. Pulse y mantenga pulsada la rueda de volumen. Gire la rueda de volumen para seleccionar [ FROM TRACK ] o [...
  • Page 60: Iheartradio

    Preparativos: Búsqueda de una emisora Instale la última versión de la aplicación iHeart Link for KENWOOD en su dispositivo (iPhone/ iPod touch) y, a continuación, cree una cuenta e inicie sesión en iHeartRadio. Pulse Gire la rueda de volumen para seleccionar una categoría y luego •...
  • Page 61: Bluetooth

    – Está activada la función Bluetooth del dispositivo conectado. – [ AUTO PAIRING ] está ajustado a [ ]. ( – La aplicación KENWOOD MUSIC PLAY está instalada en el dispositivo Android. Ajuste el ángulo del micrófono Asegúrelo mediante abrazaderas para cable (no suministradas) si fuera necesario.
  • Page 62 BLUETOOTH® BLUETOOTH — Teléfono móvil Mejorar la calidad de voz Mientras habla por teléfono... Pulse la rueda de volumen para ingresar en FUNCTION Gire la rueda de volumen para seleccionar (consulte la siguiente tabla) y luego púlsela. Repita el paso hasta que se seleccione o active el elemento deseado.
  • Page 63 BLUETOOTH® Realice los ajustes para recibir una llamada Pulse para ingresar al modo Bluetooth. Gire la rueda de volumen para seleccionar (consulte la siguiente tabla) y luego púlsela. Repita el paso hasta que se seleccione o active el elemento deseado. Realizar una llamada Para salir, pulse y mantenga pulsado Puede realizar una llamada desde el historial de llamadas, la guía telefónica o mediante marcación del número.
  • Page 64 BLUETOOTH® Eliminar un contacto NUMBER DIAL Gire la rueda de volumen para seleccionar un número (0 a 9) o un carácter ( , #, +). Pulse para ingresar al modo Bluetooth. S / T Pulse para mover la posición de ingreso. Gire la rueda de volumen para seleccionar [ CALL HISTORY ] y luego púlsela.
  • Page 65 BLUETOOTH® Otros ajustes Modo de prueba Bluetooth Puede comprobar la conectividad del perfil compatible Pulse la rueda de volumen para ingresar en [FUNCTION entre el dispositivo Bluetooth y la unidad. Gire la rueda de volumen para seleccionar (consulte la siguiente tabla) y luego púlsela. Repita el paso hasta que se seleccione o active el elemento que desee o siga las instrucciones •...
  • Page 66 BLUETOOTH® BLUETOOTH — Audio Radio Internet a través de Bluetooth Escuchar Pandora Preparativos: Seleccione [ ] para [ PANDORA SRC ]. (   Puede escuchar Pandora en su teléfono inteligente (Android OS) a través de la conexión Bluetooth de esta unidad. Abra la aplicación Pandora en su dispositivo.
  • Page 67: Ajustes De Audio

    AJUSTES DE AUDIO Mientras se escucha desde cualquier fuente... PRESET EQ DRIVE EQ TOP40 POWERFUL ROCK POPS EASY JAZZ NATURAL FUNCTION Pulse la rueda de volumen para ingresar en [ USER : Selecciona un ecualizador predefinido adecuado para el género musical. (Seleccione Gire la rueda de volumen para seleccionar [ AUDIO CONTROL ] y luego...
  • Page 68: Ajustes De Visualización

    Acerca de KENWOOD Music Editor Light y KENWOOD Music Control • Esta unidad es compatible con la aplicación para PC KENWOOD Music Editor Light y la aplicación para Android™ KENWOOD Music CUSTOM R/G/B Puede crear su propio color (cuando se selecciona [ Control.
  • Page 69: Problemas

    Esta unidad visualiza sólo letras mayúsculas, números, y un número limitado de Si desea más información acerca de Bluetooth, visite el siguiente sitio web: nombre del álbum). símbolos. www.kenwood.com/cs/ce/ “NA FILE” Asegúrese de que los archivos de audio contenidos en el medio sean compatibles. (  ...
  • Page 70 (   después de eliminar emisoras que no necesite de su dispositivo. • No se puede reproducir en Asegúrese de que KENWOOD MUSIC PLAY APP esté instalado en el “CONNECT ERROR” La comunicación es inestable. BROWSE MODE dispositivo Android.
  • Page 71 LOCALIZACIÓN Y SOLUCIÓN DE PROBLEMAS Síntoma Solución Síntoma Solución • “STATION NOT AVAILABLE” Finalizó la difusión de la emisora. No se puede controlar el Verifique si el reproductor de audio Bluetooth conectado es compatible reproductor de audio Bluetooth con Audio/Video Remote Control Profile (AVRCP). (Consulte las “STATION NOT SELECTED”...
  • Page 72 Advertencia Instalación de la unidad (montaje en el tablero) • La unidad puede utilizarse solamente con una fuente de alimentación de 12 V CC con negativo a masa. • Desconecte el terminal negativo de la batería antes de realizar el cableado y el montaje.
  • Page 73 Marrón Para conectar el sistema de navegación Púrpura/negro Al altavoz trasero (derecho) (Silenciar cable del control) Kenwood, consulte el manual de navegación Mazo de conductores Interruptor de encendido Caja de fusibles del vehículo Rojo (Cable de encendido) Al terminal de control de potencia, cuando Azul/blanco Amarillo (Cable de la batería)
  • Page 74: Especificaciones

    ESPECIFICACIONES FM Gama de frecuencias 87,9 MHz — 107,9 MHz (espacio 200 kHz) Versión Bluetooth Ver.2.1+EDR / Bluetooth 3.0 Sensibilidad útil (Relación señal/ruido = 26 dB) 8,2 dBf (0,71 μV/75 Ω) Gama de frecuencias 2,402 GHz — 2,480 GHz Sensibilidad de silenciamiento 17,2 dBf (2,0 μV/75 Ω) Potencia de salida Clase de potencia 2 +4 dBm (MÁX), 0 dBm (AVE) (DIN S/N = 46 dB) Alcance máximo de comunicación En línea recta, aproximadamente 10 m (32,8 ft)
  • Page 76 • Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

Table of Contents