Table of Contents
Advertisement
To Set the 45° Outward Fence Stop
Note: Whenever making an adjustment to the
fence, lift the fence up slightly after releasing the
lock handle to avoid scratching the table.
1. Using a sliding bevel adjusted to 135 , adjust
°
the fence to the 135 (45 inward) position.
as shown in Fig. 18
2. Adjust the 45 outward fence stop set screw
until it makes contact with the back of the fence.
as shown in Fig. 19
Gib Adjustment
After a period of use, the gibs may become
loose and need adjusting:
1. Loosen two lock nuts and gib lock screws.
As shown in Fig. 20
2. Tighten each set screw 1/4 turn starting at
the bottom and working up. If a 1/4 turn
does not remove all play, take another 1/4
turn. Repeat a 1/4 turn at a time for all three
set screws until play is removed.
3. Tighten lock screws and lock nuts
°
°
°
Figure 19
13
Figure 18
Figure 20
Advertisement
Table of Contents
