Page 3
④ ⑤ ⑥ ⑧ ⑦ ⑩ ⑨ ④ Air Flow Indication 1 APPLICATION Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding and bending plastic as well as general drying and thawing purposes. WARNING! Read this manual and general safety Instructions carefully before using the appliance, for your own safety.
2 DESCRIPTION ① Nozzle ② Ventilation Slots ③ On/off Switch (0/I/II) ④ LCD Digital Display ⑤ Storage Button ⑥ Mode Selection Button ⑦ Adjustment Button for temprature+ ⑧ Adjustment Button for temprature- ⑨ Adjustment Button for air flow + ⑩ Adjustment Button for air flow - 3 PACKAGE CONTENT LIST ...
Page 5
Work area Keep work area clean and well lit. Cluttered and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. ...
accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tool out of the reach children and do not allow persons unfamiliar with the power tool of these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
When removing paint., ensue that the work area is enclosed. Preferably wear a dust mask. Do not burn the paint. Use the scraper and keep the nozzle at leaf 25 mm away from the painted surface. When working in a vertical direction, work downwards to prevent paint from falling into the tool and burning.
Page 8
Glass protection nozzle Protection windows when stripping frames Spoon reflector nozzle Soldering pipes Cone nozzle Welding, shrink sleeving (heat concentrated over small area ) Fish tail surface nozzle Drying, thawing (heat spread over wider area ) Scraper Stripping paint and varnish ...
Page 9
Temperature adjusts at scale of 10℃. The Flasher 4.2 will keep flashing before output temperature reaches the setting temperature. - Adjust air flow by clicking the Buttons ⑨,⑩. Turn ON/OFF Switch to I, the temperature is fixed at 50℃ for cooling down. Preset mode selection ...
This tool can also be used in stationary mode. Place the tool onto the workbench. Secure the cable to prevent pulling the tool off the workbench. Carefully switch the tool on. Make sure that the nozzle always points away from you and any bystanders. Make sure not to drop anything into the nozzle.
12 WARRANTY This product is warranted in accordance with the legal/country specific regulations, effective from the date of purchase by the first user. This warranty covers all material or production flaws. It does not include: defective parts subject to normal wear &...
Need help?
Do you have a question about the THEATG-002 and is the answer not in the manual?
Questions and answers