Table of Contents
Advertisement
Adjustments
To Set The 90° Fence Stop
Note: whenever making an adjustment to the
fence, lift the fence up slightly after releasing the
lock handle to avoid scratching the table.
°
1. Using a 90 square, adjust the fence to the
°
90 position, as shown in Fig. 14
°
2. Flip the 90 swing stop into the position shown
in Fig. 15
3. Lossen the jam nut on the 90 fence stop bolt
Fig. 15
°
4. Adjust the 90 fence stop bolt until it makes
°
contact with the 90 swing stop.
5. Retighten the jam nut lossened in STEP 3.
To Set the 45° Inward Fence Stop
Note: Whenever making an adjustment to the
fence, lift the fence up slightly after releasing the
lock handle to avoid scratching the table.
°
1. Using a 45 square, adjust the fence to the
°
45 inward position, as shown in Fig. 16
2. Lossen the set screw on fence stop block
as shown in Fig. 17
3. Adjust the fence stop black until it makes
contact with the back of the fence
bracket.
4. Retighten the set screw on the fence stop
stop block lossened in STEP 2
°
12
Figure 14
Figure 15
Figure 16
Figure 17
Advertisement
Table of Contents
