Object Stopped; Object Class - Ganz PixelPro Series Interface Manual

H.264, with gxi technology

Hide thumbs Also See for PixelPro Series:

Table of Contents

Configuration of Zones and Rules

Object Stopped

Enable the object stopped rule on the selected zone by checking the Stopped box in the

properties inspector and click apply.

Objects that are stopped inside a zone for longer than the defined amount of time will

trigger the rule and raise an alarm.

The stopped time can be configured by simply clicking in the Time box on the rule control

and editing the value in-place.

Once the camera has been calibrated, it's possible to include or exclude specific object types

in the detection rules.

Select and enable an Object Filter by checking the box. Select whether the rule should

include or exclude the object type. Select the object type to include or exclude.

Apply the changes.

Table of Contents