FUNAI HD-A2685 Service Manual page 18

The status displayed in *2 is as shown below.
Display
Loading F/W from Update Disc or
EXECUTING
writing to Flash memory
ERROR Error during Flash memory writing
FILE ERROR Check SAM error in F/W file
READ ERROR Error during F/W file reading
Fig. e: VFD Display during update
When the TV screen displays "Firmware
Updating... XX% Complete," the VFD will indicate
"XX"%.
7. When update is complete, the unit will shut off
automatically.
8. If an error occured during updating, the TV screen
will display Fig. f.
*FIRMWARE version will differ depending on the
model. Fig. f is an example.
DISC UPDATE
TARGET: B/E
STATUS: ERROR
PLEASE PUSH POWER BUTTON
Fig. f: TV Display when completing update with error
Fig. h: VFD Display when completing update with error
In this case, all button operations will be invalid
except [STANDBY-ON] button.
9. Press [STANDBY-ON] button to turn the power off
and press [STANDBY-ON] button again to turn the
power back on and finish updating.
Status
1-8-2
3. How to Verify the Firmware
Version
1. Turn the power on and remove the disc in the tray.
2. To switch the HDD & DVD into HDD mode, press
[HDD] on the remote control unit.
3. To put the HDD & DVD into version display mode,
press [VARIABLE SKIP] and [1], [2], [3] buttons on
the remote control unit in that order within 3
seconds. Fig. i appears on the TV screen.
******* part will differ depending on the model.
Fig. i is an example.
VERSION INFORMATION
Model Name :
BE Ver. :
FE Ver :
Sub Micon Ver. :
REGION:
CPRM KEY NO:
HDD MODEL:
DivX Ver.:
LD ADJUSTMENT:
DISC ADJUSTMENT:
Fig. i: Firmware version display
Display
MODEL NAME Product number
BE Ver. Firmware B/E version
FE Ver. Application F/E version
Sub Microcontroller firmware
Sub Micon Ver.
version
REGION Region code of playable DVD disc
CPRM KEY
CPRM key number
NO.
HDD serial number and capacity
HDD MODEL
(GByte)
LD LD adjustment progress (done: OK/
ADJUSTMENT not done: --)
DISC Factory adjustment progress (done:
ADJUSTMENT OK/not done: --)
Effective buttons in this mode are the following...
Buttons
Power off to release from this
POWER
mode.
Version display disappears and
SETUP
SETUP screen appears.
Version display disappears and
TOP MENU
TOP MENU screen appears.
Version display disappears and
TIMER PROG. TIMER PROGRAMMING screen
appears.
DUBBING Version display disappears and
MENU DUBBING screen appears.
While displaying version and
Others
normal operation.
E2B10ED
H3T*****B2C
R34_***_**
T3007THP
2
(0x***)
***********(***GByte)
***
OK
OK
Contents
Operations
E2B21FW