Table of Contents
Advertisement
Preliminary
b. General Advanced Configuration Window
The General Advanced Configuration window allows you to enter
Table A-1 summarizes the data fields on the AP General Advanced Configuration
window.
Table A-1. AP General Advanced Configuration Window Field
Advanced Configuration
Field
Data Rate
Transmit Power
Beacon Interval
Data Beacon Rate
Fragment Length
RTS/CTS Threshold
Enable QOS
Shared Key Configuration
The Shared Key Configuration window allows you to specify Encryption
Key(s) if you enable encryption for the AP in the general configuration
window.
Actiontec Electronics, Inc.
advanced, generic operating information for the AP. From
the AP General Configuration window, click on Advanced to
access the General Advanced Configuration window.
Descriptions
Description
Specifies rate of data transmission. Select the
desired rate from the drop-down menu. The
Best selection will adapt the rate to the best
available.
Specifies the level of transmit power. Specify
the value of the transmit power from the drop-
down menu.
Decrease the transmit power if more than one
AP is co-located using the same channel
frequency.
Specifies the Beacon Interval value. Enter a
value between 20 and 1000.
Specifies the Data Beacon Rate. Enter a value
between 1 and 16384 that specifies the Delivery
Traffic Indication Message (DTIM).
Specifies the fragment length. Enter a value
between 256 and 2346.
Specifies the value of the RTS/CTS threshold.
Enter a value between 256 and 2346.
Use the checkbox to allow the AP to participate
in a QOS environment.
Chapter
COMPANY CONFIDENTIAL
2
Advertisement
Table of Contents
