Table of Contents
Advertisement
PRELIMINARY
AP Network Attachment
This section provides procedures for connecting and configuring the AP to a Host
PC (HPC). Configuration can be performed either from a web browser accessing
the built-in web server, or by entering command through the serial port command
line interface (CLI). For detailed information on using the web server, refer to AP
Web Server in Appendix A. For detailed information on using CLI
AP Network Connections
Connect your HPC to the AP using one of the following two methods:
Use an Ethernet crossover cable (not supplied) to connect directly to the Ethernet
port of the HPC.
15. Use standard Ethernet cables (not supplied) to connect through a hub or
Ethernet switch. Follow these steps to establish the network connections:
17. Attach the supplied serial cable from the AP RS-232 serial interface to the HPC serial
COM port.
18. Connect the AP Ethernet port to the HPC Ethernet card through the Ethernet
hub/switch or an Ethernet crossover cable.
19. Plug in the provided 3.3 V power supply to the AP power supply connector.
Actiontec Electronics, Inc.
and Configuration
2.
COMPANY CONFIDENTIAL
Advertisement
Table of Contents
