Setting Up The Access Point; Wireless Access Point Configuration Utility - ActionTec 11Mbps Wireless Access Point User Manual

Setting Up the
Access Point
The Access Point is a ready-to-use device. Its factory default settings allow the user
to access the wireless network after making a few adjustments to the wireless clients.
See "Settings" on page 15 for more information on adjusting the wireless clients to
communicate via the Access Point.
The configuration capabilities of the Access Point include changing the security
settings, radio channels, IP addresses, and client access privileges.

Wireless Access Point Configuration Utility

The Wireless Access Point Configuration Utility contains two parts: a) the
Actiontec AP Wizard that locates all access points available to the computer;
and b) a Web-based configuration utility that allows the user to change the settings
for a selected access point.
Loading and Using the Actiontec AP Wizard
1. Insert the Installation CD in the CD-ROM drive of the computer connected
to the Access Point.
2. The InstallShield Wizard launches. If the InstallShield Wizard does not
launch, double-click on the file SETUP.EXE in the CD's root directory.
3. When the first InstallShield Wizard window appears, click Next.
13
4