Preface; About This Document - ActionTec 802AA User Manual

PRELIMINARY

Preface

The intent of this document is to familiarize you with the Actiontec Access Point
(AP) Reference Design, its physical characteristics, setup, configuration, and
usage. AP hardware developers should refer to the AP Reference Design Functional
Specification, AP Hardware Design Guide, AP Reference Design Board Layouts, AP
Reference Design Schematics, and AP Reference Design Bill of Materials. AP
software developers should refer to the AP Programmer's Guide. Both the AR5110
Data Sheet and the AR5210 Data Sheet will provide valuable AR5000 chipset
reference for both hardware and software developers.
After reading this user's guide, you should be able to install, configure, control,
and maintain the Actiontec AP Reference Design provided as part of an Actiontec
Evaluation or Developer's Kit.
a. About this Document
This document consists of the following chapters and appendixes:
Chapter 1
Chapter Error!
Reference
source not
found.
Chapter 2
Appendix A
Actiontec Electronics, Inc.
Introduction—Describes the Access Point package
contents and system requirements.
2. Access Point Physical Description—Provides a
physical description of the Access Point.
AP Network Attachment and Configuration—
Describes the Access Point network connections
and initial software configuration.
AP Web Server—Describes the use of the web
server to configure the Access Point.
COMPANY CONFIDENTIAL