Valor LEGEND G3.5 Installation Instructions

717BPB 3-Sided Backing Plate
Use with 716EH and 721ED Edgemont Trim and Door fi tted to Valor 700 Models only
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
The 717 3-Sided Backing Plate is intended to be used
with the 716 Edgemont Hammerered Trim Kits or the
721 Edgemont Door Kits to install on the Valor heater
model 700.
The 717 combined with the 716 or 721 can also be
installed with an additional backing plate 710BPB or
714BPB as well as a riser trim 725RT or 793RT to
cover larger cavity opening.
36-1/4" (922 mm)
717BPB with 716 Edgemont Hammered Trim
4005863-01
© Copyright Miles Industries Ltd., 2016
L
EGEND

Installation Instructions

HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1-1/2"
(38 mm)
1/2"
(13 mm)
G3.5
Leave this manual
with the appliance.
Retain this manual
for future reference.
Mounting of the 717 does not affect clearances or other
specifi cations listed in the heater installation manuals—
see installation manual supplied with the heater for
more information.
717BPB Backing Plate
Overview—shown with 716EH Edgemont Trim
(engine, Edgemont Hammered Trim Kit sold separately)
IN STA LLER
C ON SUM ER
700 engine
Edgemont Hammered Trim
and side doors